CEN Racing CEG8910
$219.00
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Fiat Abarth 595 1/12 Scale 2WD Solid Axle Monster Truck
KILLER LITTLE THING!! Officially licensed CEN Racing Q-series Fiat ABARTH 595 RTR. 1/12 scale Solid Axle 2WD (4WD optional upgrade) Monster Truck, with wheelie bar, Hobbywing 40A ESC, Savox servo, and big bore oil shocks.
ESC:
- 40A WP-1040-Brushed (Powered by HOBBYWING)
- Water-proof and dust-proof for all weather
- Built-In Capacitor Module
- Automatic throttle range calibration
- Low voltage cut-off protection for Li-Po (lithium polymer) and NiMh battery
- Over-Heat protection and throttle signal loss protection
- Easily programmed with jumpers
Motor -RS-540High Torque Motor, Powered By Mabuchi Motor:
Servo:
- 6Kg Servo O. E. M. by Savox
- 4.8V 0.16 sec/60deg 4.2 kg-cm
- 6.0V 0.14 sec/60deg 6.5 kg-cm
- 25T Horn Gear Spline
Radio System:
- Pistol-Grip Mod-3S 3 Channel Transmitter
- Digital Trimming
- Steering Dual-Rate (ST D/R) Adjustment
- End Point Adjustment (EPA)
- Build in Failsafe
- Power Alarm Transmitter Model: 82190
- Frequencies: 2.4GHz
- Weight: 375gm
- Power Supply: 4 AA Alkaline Dry Cells DC 6V
Chassis:
- DVP (Dual Vertical Plate) Chassis Design
- Sealed Receiver Compartment
- Easy Access/Quick Release Battery Tray
- Battery Tray Size 146x50x25mm
- Adjustable Wheelie Bar Ready (w/Ball Bearing)
- Full Precision Ball Bearing Support
- Adjustable Turnbuckles
- hardened steel Steering Drag Link
- Fully Equipped with Allen Hex Screws
- Adjustable Body Post
- High Torque Servo Saver
- Optional 4-Wheel Steering Design
Suspension:
- Big Bore Oil Filled Coil Over Shocks
- Aluminum Shock Caps
- 10mm over size shock body with 3mm hardened steel polished shaft
- Stiff Hard Racing Spring
- Fixed Wheelbase
- Ride Height- Adjustable with pre-load
- Realistic 4-Link Suspension design
Drivetrain:
- 2 Wheel Drive
- Center Shaft Drive Train for more power transferred to the wheels
- Hight Efficient Transmission System
- Wide Range Easy Changeable Gear Box Design
- Sealed transmission eliminates dirt and dust substances to get in
- Sealed Axle housing
- 5mm Hardened Steel Axle shaft
- Differential Metal Center Locker Front/Rear Planetary Gear Type
- Ring & Pinion 30/15T
- width: 10.60inch (270mm)
- Wheelbase: 6.9inch (175mm)
- Ground Clearance: 2.6inch 65mm
ESC:
- 40A WP-1040-Brushed (Powered by HOBBYWING)
- Water-proof and dust-proof for all weather
- Built-In Capacitor Module
- Automatic throttle range calibration
- Low voltage cut-off protection for Li-Po (lithium polymer) and NiMh battery
- Over-Heat protection and throttle signal loss protection
- Easily programmed with jumpers
Motor -RS-540High Torque Motor, Powered By Mabuchi Motor:
Servo:
- 6Kg Servo O. E. M. by Savox
- 4.8V 0.16 sec/60deg 4.2 kg-cm
- 6.0V 0.14 sec/60deg 6.5 kg-cm
- 25T Horn Gear Spline
Radio System:
- Pistol-Grip Mod-3S 3 Channel Transmitter
- Digital Trimming
- Steering Dual-Rate (ST D/R) Adjustment
- End Point Adjustment (EPA)
- Build in Failsafe
- Power Alarm Transmitter Model: 82190
- Frequencies: 2.4GHz
- Weight: 375gm
- Power Supply: 4 AA Alkaline Dry Cells DC 6V
Chassis:
- DVP (Dual Vertical Plate) Chassis Design
- Sealed Receiver Compartment
- Easy Access/Quick Release Battery Tray
- Battery Tray Size 146x50x25mm
- Adjustable Wheelie Bar Ready (w/Ball Bearing)
- Full Precision Ball Bearing Support
- Adjustable Turnbuckles
- hardened steel Steering Drag Link
- Fully Equipped with Allen Hex Screws
- Adjustable Body Post
- High Torque Servo Saver
- Optional 4-Wheel Steering Design
Suspension:
- Big Bore Oil Filled Coil Over Shocks
- Aluminum Shock Caps
- 10mm over size shock body with 3mm hardened steel polished shaft
- Stiff Hard Racing Spring
- Fixed Wheelbase
- Ride Height- Adjustable with pre-load
- Realistic 4-Link Suspension design
Drivetrain:
- 2 Wheel Drive
- Center Shaft Drive Train for more power transferred to the wheels
- Hight Efficient Transmission System
- Wide Range Easy Changeable Gear Box Design
- Sealed transmission eliminates dirt and dust substances to get in
- Sealed Axle housing
- 5mm Hardened Steel Axle shaft
- Differential Metal Center Locker Front/Rear Planetary Gear Type
- Ring & Pinion 30/15T
SPECIFICATIONS:
- length: 11inch (280mm)- width: 10.60inch (270mm)
- Wheelbase: 6.9inch (175mm)
- Ground Clearance: 2.6inch 65mm
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov