Associated ASC9041

Associated brand 1/10 scale electric powered, radio controlled,
Associated RC10 B4.2 Factory Team off-road buggy kit.
**Additional Technical Info Will Be Added When It Becomes Available. **
Chassis: +8mm B4
Drive: Two wheel with CVA drive shafts with pin retainer clips with
steel center-drilled front axles
Transmission: 2.6:1 laydown type, high-torque capacity with VTS
slipper clutch (variable torque, multi-plate slipper with 3 drive
surfaces)
Ball Bearings: Full set, 14 rubber sealed
Shocks: Factory Team 12mm Big Bore hard anodized aluminum with TiN
Gold 3mm shock shafts
Shock Towers: Optimized for the Big Bore shock
Motor Plate: Factory Team blue aluminum milled construction
Differentials: Ball type with light weight outdrives
Spur Gear: Plastic, 81 tooth, 48 pitch
Wheels:
Wheel Hexes: Factory Team front and rear 12mm blue aluminum clamping
type
Body: ProLine Bulldog
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes
the angle of the front tires as viewed from the top
Suspension: Optimized for use with LiPo batteries, mounts for 4,
3.5, 3, and 2.5 rear toe
Turnbuckles: Factory Team blue anodized titanium turnbuckles
Front axles: Steel center drilled
Steering: Factory Team aluminum bellcrank,
Servo saver: Built-in with aluminum servo saver bolt and heavy duty
spring
Battery Strap: Carbon fiber with blue aluminum thumb screws
Associated RC10 B4.1 Factory Team off-road buggy kit, clear Pro-Line
Vortex body with wing, decals, tires, wheels, shock oil and
instruction manual
Radio: Two-channel with high-speed servo
Radio Batteries: (8) AA size
Pinion Gear: Number of teeth to be determined by motor
Motor: 540 size for buggy applications
Battery: 6-cell NiMh with standard connector OR 2S LiPo battery
Battery Charger: To match selected battery
Building and track equipment
Vehicle;
length: 15.16 (385mm)
width:
Weight: 3.4lbs (1530g) running weight will vary depending on parts
installed
Wheelbase: 11.1 (281mm)
Internal Gear Ratio: 2.6:1
Body:
length: 11.3 (287mm)
width: 5.5 (140mm)
height: 2.9 (73mm)
The DuraTrax Element 3900kV brushless System (DTXC3122) is an ideal,
afF0RDable upgrade for this vehicle.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x3/8 Transmission 2 DTXC1423
2 10x16mm Transmission 1 ASCC9832
2 3/16x3/8 Rear Hubs 1 DTXC1423
2 .187x0.50x.196 Rear Hubs 1 ASCC7935
4 3/16x3/8 Front Hubs 1 DTXC1423
jxs 01/18/13