Associated ASC9038
$140.59
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
discontinued RC10B4.1 RTR 2.4ghz Brushed
Team Associated brand 1/10 scale, 2.4GHz radio controlled, electric powered, ready to run
RC10B4.1 Off-Road Buggy from Associated.
FEATURES:
Chassis: Molded composite low CG
Drive: Rear wheel
Motor: Reedy 17 turn brushed
Radio: 2.4GHz XP3-SS 3-channel with SHV1504 metal gear steering servo
Electronic Speed Control: XP SC200 with forward and reverse,
reverse lockout and LiPo cutoff
Differential: Sealed planetary gear
Slipper Clutch: Dual sided, adjustable
Shocks: Blue aluminum body, fluid filled with molded pre-load clips
Battery Holder: Strap with twist-lock thumb knobs
Ball Bearings: Rubber sealed in gearbox
Body: Painted Interceptor 2.0 polycarbonate
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Wheels: White dish Front, 0.87 (22mm) wide, 2.2 (56mm) diameter
Rear, 1.42 (36mm) wide, 2.2 (56mm) diameter
Tires: Front ribbed, 1.25 (32), 2.2 (56mm) diameter
Rear, 1.7 (43mm) wide, 2.2 (56mm) diameter
Steering: Angled bellcrank co-planar with servo saver
YOU WILL RECEIVE:
Assembled RC10B4.1 Off-Road Buggy with brushed motor, 2.4GHz radio,
ESC, painted body, decals and instructions
REQUIREMENTS:
AA Batteries: 8 for transmitter
Battery: 6-cell sub C nimh or 2-cell LiPo
Battery Charger: For selected battery type
Building and track equipment
SPECIFICATIONS:
Vehicle-
length: 14.8 (377mm)
width: 9.8 (250mm)
height: 6 (152mm) at top of wing panel
Wheelbase: 11.3 (288mm)
Weight: 3.4lbs (1530g)
Internal Gear Ratio: 2.6:1
Body-
length: 11 (276mm)
width: 6.2 (159mm)
height: 2.4 (60mm)
COMMENTS:
The RC10B4.1 Brushed Powered Off-Road Buggy is available in the
following color schemes;
Blue/White, ASCD38BW
Gray/White, ASCD38EW
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x16mm Transmission 1 ASCC9832
2 3x16 x 3/8 Transmission 1 DTXC1423
4 3x16 x 3/8 Rear Hubs 2 DTXC1423
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov