Associated ASC7036
$193.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued RC10t4.1 RTR 2.4ghz Brushed
Team Associated brand electric powered, radio controlled, ready to run
Team Associated RC10T4.1 off-road Racing Truck.
**Additional Technical Info Will Be Added When It Becomes Available. **
Chassis: Molded composite, low center of gravity
Drive: Rear wheel, with steel dog bones (not CVDs)
Differential: Sealed, planetary gear
Transmission: 2.6:1 laydown Stealth type, high-torque capacity
Bearings: Full set, rubber sealed
Shocks: Oil-filled blue anodized aluminum (silver springs on front
and green springs on the rear)
Radio: Team Associated XP3-SS 2.4GHz 3-channel with SHV1504 metal
gear steering servo
Speed Control: XP SC200 ESC with LiPo cutoff, forward and reverse
with reverse lockout
Motor: Reedy 17 turn
Front Tires: Associated racing compound ribbed
Rear Tires: Associated racing compound bow-tie style
Wheels: White (dyeable) dish style 2.2 (56mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Angled coplanar design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel,
built-in servo saver
Body: Painted Interceptor-T with rear wing
Slipper Clutch: High-torque capacity double-sided provides finer
adjustment
Impact-resistant rear motor guard
Adjustable battery position
Pre-assembled Team Associated RC10T4.1 truck with 17T motor, 2.4GHz
radio, metal gear steering servo, painted body, ESC and manual
AA Batteries: Eight for transmitter
Battery: 6-cell stick
Battery Charger: Peak type for selected battery
Building and track equipment
length: 15.3 (390mm)
width: 12.4 (316mm)
Track: 10.6 (270mm)
Weight: 3.9lbs (1756g)
Wheelbase: 11.3 (288mm)
Ground Clearance:
Gear Ratio: 2.6:1
If bearings are needed use:
Two DTXC1423 3/8 x 3/16 four needed, front wheels
Two DTXC1423 3/8 x 3/16 four needed, rear hub carriers
Two DTXC1423 3/8 x 3/16 four needed, transmission-top & middle
One DTXC1411 5/32 x 5/16 two needed, diff outdrives
One DTXC1437 3/8 x 5/8 two needed, ball diff
jxs 12/18/09
Team Associated RC10T4.1 off-road Racing Truck.
**Additional Technical Info Will Be Added When It Becomes Available. **
FEATURES:
Chassis: Molded composite, low center of gravity
Drive: Rear wheel, with steel dog bones (not CVDs)
Differential: Sealed, planetary gear
Transmission: 2.6:1 laydown Stealth type, high-torque capacity
Bearings: Full set, rubber sealed
Shocks: Oil-filled blue anodized aluminum (silver springs on front
and green springs on the rear)
Radio: Team Associated XP3-SS 2.4GHz 3-channel with SHV1504 metal
gear steering servo
Speed Control: XP SC200 ESC with LiPo cutoff, forward and reverse
with reverse lockout
Motor: Reedy 17 turn
Front Tires: Associated racing compound ribbed
Rear Tires: Associated racing compound bow-tie style
Wheels: White (dyeable) dish style 2.2 (56mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Angled coplanar design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel,
built-in servo saver
Body: Painted Interceptor-T with rear wing
Slipper Clutch: High-torque capacity double-sided provides finer
adjustment
Impact-resistant rear motor guard
Adjustable battery position
YOU WILL RECEIVE:
Pre-assembled Team Associated RC10T4.1 truck with 17T motor, 2.4GHz
radio, metal gear steering servo, painted body, ESC and manual
REQUIREMENTS:
AA Batteries: Eight for transmitter
Battery: 6-cell stick
Battery Charger: Peak type for selected battery
Building and track equipment
SPECIFICATIONS:
length: 15.3 (390mm)
width: 12.4 (316mm)
Track: 10.6 (270mm)
Weight: 3.9lbs (1756g)
Wheelbase: 11.3 (288mm)
Ground Clearance:
Gear Ratio: 2.6:1
COMMENTS:
If bearings are needed use:
Two DTXC1423 3/8 x 3/16 four needed, front wheels
Two DTXC1423 3/8 x 3/16 four needed, rear hub carriers
Two DTXC1423 3/8 x 3/16 four needed, transmission-top & middle
One DTXC1411 5/32 x 5/16 two needed, diff outdrives
One DTXC1437 3/8 x 5/8 two needed, ball diff
jxs 12/18/09
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov