Associated ASC30120
$459.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued RC10TC7 Factory Team Kit
This is the Electric Powered, Radio Controlled, 1/10 scale
RC10TC7 Factory Team Touring Car from Team Associated.
**Additional Technical Info Will Be Added When It Becomes Available. **
Chassis: Carbon fiber
" (
mm) thick
Drive: Four wheel belt with front spool with replaceable outdrives
and rear gear differential
Rear Dufferential: light weight ball type
Shocks: Fox shocks with genuine Kashima coat
Motor Mount: Redesigned one-piece, centrally located to produce the
most consistent chassis flex for predictable cornering
Steering: Updated dual bellcrank system with low CG and refined
Ackermann range for best performance on any track condition,
Ackermann refers to the effect of the inside wheel front wheel
turning faster that the outside front wheel during turns
Bumper: Front foam
Turnbuckles: Titanium for strength and light weight
Ball Bearings: Full set, 22 total
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Radio: 2-channel with high-speed steering servo
Motor:
ESC:
Battery: 3.7V-7.4V LiPo, or 6.0V LiFe
Battery Charger: To match selected battery
LiPo Charging Bag: If using LiPo battery
Pinion Gear:
Tires and Wheels: 1/10 scale touring car
Body: 1/10 scale polycarbonate touring car
Paint, building and track equipment
length: 14.17" (360mm)
width: 7.48" (190mm)
Wheelbase: 9.9 - 10.1" (253.5 - 257.5mm)
Internal Gear Ratio: 2.0:1
Weight: 1.14lbs (360mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
jxs 12/11/15
ACCESSORIES
RC10TC7 Factory Team Touring Car from Team Associated.
**Additional Technical Info Will Be Added When It Becomes Available. **
FEATURES:
Chassis: Carbon fiber
" (
mm) thick
Drive: Four wheel belt with front spool with replaceable outdrives
and rear gear differential
Rear Dufferential: light weight ball type
Shocks: Fox shocks with genuine Kashima coat
Motor Mount: Redesigned one-piece, centrally located to produce the
most consistent chassis flex for predictable cornering
Steering: Updated dual bellcrank system with low CG and refined
Ackermann range for best performance on any track condition,
Ackermann refers to the effect of the inside wheel front wheel
turning faster that the outside front wheel during turns
Bumper: Front foam
Turnbuckles: Titanium for strength and light weight
Ball Bearings: Full set, 22 total
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
YOU WILL RECEIVE:
REQUIREMENTS:
Radio: 2-channel with high-speed steering servo
Motor:
ESC:
Battery: 3.7V-7.4V LiPo, or 6.0V LiFe
Battery Charger: To match selected battery
LiPo Charging Bag: If using LiPo battery
Pinion Gear:
Tires and Wheels: 1/10 scale touring car
Body: 1/10 scale polycarbonate touring car
Paint, building and track equipment
SPECIFICATIONS:
length: 14.17" (360mm)
width: 7.48" (190mm)
Wheelbase: 9.9 - 10.1" (253.5 - 257.5mm)
Internal Gear Ratio: 2.0:1
Weight: 1.14lbs (360mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
jxs 12/11/15
ACCESSORIES
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov