Associated ASC90004

This is the radio controlled, electric powered, 1/10 scale SC10 4x4 Short Course Racing Kit from Associated. **Additional Technical Info Will Be Added When It Becomes Available.** Chassis: Composite modular construction with low CG and Low Polar Moment Design Drive: Hybrid belt/gear drive, four wheel 5mm heavy duty belt system with external tension adjustment, CVAs with captured drive pins and heavy duty 6mm alloy axles Slipper Clutch: Decoupled design allows front and rear wheels to slip independently for greater traction and stability under bumpy conditions Differentials: Sealed, fluid filled, 32 pitch planetary gears Shocks: Oil-filled aluminum body 13mm big bore with low friction X- ring seals Body: Clear, short course design Receiver Box: Sealed, water resistant Steering: Ball bearing with adjustable steering stops Wheels: 12mm hex drive replica Tires: Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle SC10 4x4 Short Course Racing Kit with Tires, Wheels, Clear Body, Decals and Instruction Manual Radio: 2-channel with high-torque steering servo Motor: 540 or 550 size, brushless recommended Pinion Gear: ESC: Compatible with selected motor Battery: 6-cell NiMH or 2-cell LiPo Battery Charger: To match selected battery Building and track equipment Vehicle- Length: 21.6" (550mm) Width: 11.5" (293mm) Weight: 6.1lbs (2775g) weight will vary slightly depending on electronics used Wheelbase: 12.9" (327mm) Internal Gear Ratio: 2.57:1 Body- Length: Width: Height: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set jxs 01/31/11 &