Associated ASC7023
$259.99

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Factory Team RC10t4.1 Kit
This is the electric powered, radio controlled,
Team Associated RC10T4.1 off-road Racing Truck Kit.
Chassis: Molded composite, low center of gravity
Drive: Rear wheel, with steel dog bones (not CVDs)
Differential: Ball type with lightweight outdrives
Transmission: 2.6:1 laydown Stealth type, high-torque capacity
Bearings: Full set, rubber sealed
Shocks: Oil-filled blue anodized aluminum (blue springs on front
and green springs on the rear)
Front Tires: JConcepts Carvers in blue compound, 2.2" (55mm) inner
diameter, 2.5" (63mm) wide
Rear Tires: JConcepts Double-Dees in green compound, 2.2" (55mm)
inner diameter, 2.5" (63mm) wide
Wheels: White (dyeable) dish style 2.2" (56mm) diameter
Caster: Adjustable front and rear, suspension mounts for 4, 3.5, 3
and 2.5° rear toe included, caster/toe-in refers to the angle of
the front when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Angled coplanar design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel,
built-in servo saver
Body: Clear JConcepts high-flow T4
Slipper Clutch: V2 assembly with high-rate spring for more consistent
adjustment
Impact-resistant rear motor guard
Adjustable battery position
Team Associated RC10T4.1 truck kit with tires, foam inserts, decals
clear body, instruction manual
Radio: 2-channel with high-torque steering servo
Motor: Associated Reedy 17T recommended
ESC: To match selected motor
AA Batteries: Eight for transmitter
Battery: 6-cell stick or 2-cell LiPo
Battery Charger: Peak type for selected battery
Building and track equipment
Vehicle-
Length: 15.3" (390mm)
Width: 12.4" (316mm)
Track: 10.6" (270mm)
Weight: 3.9lbs (1756g)
Wheelbase: 11.3" (288mm)
Gear Ratio: 2.6:1
Body-
Length: 15.1" (385mm)
Width: 5.7" (146mm)
Height: 4.1" (104mm)
The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
afF0RDable upgrade for this vehicle.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/8 x 3/16" Front Wheels 2 DTXC1423
4 3/8 x 3/16" Rear Wheels 2 DTXC1423
4 3/8 x 3/16" Transmission 2 DTXC1423
2 5/32 x 5/16" Diff Outdrives 1 DTXC1411
2 3/8 x 5/8" Ball Diff 1 DTXC1437
jxs 09/01/10
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS: