Associated ASC9040

This is the 1/10 scale electric powered, radio controlled,
Associated RC10 B4.1 Factory Team Competition Worlds Buggy Kit.
Chassis: Molded composite bathtub style, +8 B4.1 chassis conversion
kit
Drive: Two wheel with CVA drive shafts with pin retainer clips with
steel center-drilled front axles
Transmission: 2.6:1 laydown type, high-torque capacity, V2 slipper
assembly with high rate spring for more consistent slipper clutch
adjustments
Ball Bearings: Full set, 14 rubber sealed
Shocks: Factory Team V-2 oil-filled hard anodized threaded with bleed
screw caps, 30 weight silicone shock oil, Factory Team blue
aluminum shock bushings and pivot balls
Dog Bones: MIP CVDs
Differentials: Ball type with light weight outdrives
Spur Gear: Plastic, 81 tooth, 48 pitch
Front Tires: Pro-Line M3 4 rib inner diameter: 2.2" (55.88mm), 1"
(26mm) wide with foam inserts
Rear Tires: Pro-line M3 Holeshot high traction, outer diameter 3.15"
(80mm), inner diameter 2.2" (55.88mm) with foam inserts
Wheels: Yellow dish front; diameter 2.2" (55.88mm), width 0.87"
(22.31mm), rear; diameter 2.2" (55.88mm), width 1.42" (36.08mm)
Body: Pro-Line Bulldog +8mm
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes
the angle of the front tires as viewed from the top
Suspension: Optimized for use with LiPo batteries, mounts for 4,
3.5, 3, and 2.5 rear toe
Turnbuckles: Factory Team blue anodized titanium turnbuckles
Front axles: Steel center drilled
Rear Hubs: Factory Team 0
Steering: Angled-bellcrank design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel
Forward-swept front end design provides maximum front end ground
clearance
Servo saver: Built-in with aluminum servo saver bolt and heavy duty
spring
Battery Strap: Carbon fiber with blue aluminum thumb screws
Associated RC10 B4.1 Factory Team Worlds buggy kit, clear Pro-Line
Bulldog +8mm body with wing, decals, tires, wheels, shock oil and
instruction manual
Radio: Two-channel with high-speed servo
Radio Batteries: (8) AA size
Pinion Gear: Number of teeth to be determined by motor
Motor: 540 size for buggy applications
Battery: 6-cell NiMh with standard connector OR 2S LiPo battery
Battery Charger: To match selected battery
Building and track equipment
Vehicle;
length: 15.16" (385mm)
width: 9.84" (250mm)
Weight: 3.38lbs (1535g) running weight will vary depending on parts
installed
Wheelbase: 11.06" (281mm)
Internal Gear Ratio: 2.6:1
Body:
length: 10.9" (276mm)
width: 5.6" (143mm)
height: 2.4" (62mm)
The DuraTrax Element 3900kV brushless System (DTXC3122) is an ideal,
afF0RDable upgrade for this vehicle.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 3/16x3/8" Transmission 1 DTXC1423
2 10x16mm Transmission 1 ASCC9832
2 3/16x3/8" Rear Hubs 1 DTXC1423
2 .187x0.50x.196 Rear Hubs 1 ASCC7935
4 3/16x3/8" Front Hubs 1 DTXC1423
jxs 01/10/12
ir/jxs
&