Associated ASC9037

This is the 1/10 scale electric powered, radio controlled, ready to run Team Associated RC10B4 RS (Race Spec) off-road buggy kit. _ Chassis: All-new molded composite, low center of gravity Transmission: 2.6:1 laydown type, high-torque capacity Bearings: Full set shielded, 14 total Shocks: Oil-filled hard anodized aluminum Radio: 27MHz AM Team Associated XP 2 with throttle ATV, steering and throttle trim and reverse, metal gear steering servo, transmitter does not have charge jack Speed Control: LRP Ai digital with reverse and auto setup Motor: Team Associated Reedy Radon 17 turn with composite impact resistant motor guard Dog Bones: CVD dog bones designed into rear suspension to push the B-4 out to the maximum width for more traction Front Tires: Proline M3 racing compound "wide-body" 1" (26mm) wide, 3.2" (82mm) diameter Rear Tires: Proline M3 racing compound, 1.8" (45mm) wide, 3.4" (86mm) diameter Front Wheels: Proline Velocity white 0.94" (24mm) wide, 2.4" (61mm) diameter Rear Wheels: Proline Velocity white 1.5" (38mm) wide, 2.4" (61mm) diameter Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Suspension: Symmetrical suspension arm design with all four arms the same length, captured hinge pins-no E-clips Steering: Angled-bellcrank design to minimize bump steer and maintain constant steering angles throughout the range of suspension travel Body: Painted Proline buggy style with adjustable clear rear wing color scheme is either red or blue with yellow flames, see COMMENTS Forward-swept front end design provides maximum front end ground clearance Slipper Clutch: High-torque capacity double-sided provides finer adjustment Battery Position: Adjustable with new style battery hold down strap Built-in servo saver One pre-assembled RC10B4 RS buggy kit with oil-filled shocks, tires, foam inserts, wheels, 81 tooth spur gear, steel turnbuckles, 23 tooth pinion gear, 17 turn motor, electronic speed control, 2-ch pistol grip AM radio w/steering servo, painted body, clear _ rear spoiler, decals and photo-illustrated manual Radio Batteries: (8) AA size Battery Pack: Six cell flat with standard connector AC/DC Charger: Timed or peak for 6-cell battery Building and track equipment Length: 365mm (14.375") Rear Track: 254mm (10") Front Track: 248mm (9.75") Height: 108mm (4.25") Wheelbase: 270mm (10.625") adjustable _ Ground Clearance: 25.4mm (1") It is not possible to request a specific radio channel or color when ordering because they are supplied by the manufacturer at random. For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 3/16x3/8" Transmission 1 DTXC1423 2 3/8x5/8" Transmission 1 DTXC1437 2 3/16x3/8" Idler Gear Shaft 1 DTXC1423 4 3/16x3/8" Rear Hub Carriers 2 DTXC1423 4 3/16x3/8" Front Hub Carriers 2 DTXC1423 Alternative pinion gear selections Motor 48 Pitch pinion stock 24 teeth 14 turn 22 teeth 13 turn 21 teeth 12 turn 20 teeth 11 turn 19 teeth 10 turn 18 teeth jxs 2/20/06 ir/jxs &