Associated ASC90006

Team Associated brand 2.4GHZ radio controlled, brushless electric powered, 1/10 scale RTR SC10 4x4 Short Course Racing Truck from Associated. This version has the Pro Comp trim scheme driven by Travis Coyne. FEATURES: Chassis: Composite modular construction with low CG and Low Polar Moment Design Motor: Reedy 550 SL 3500kV four-pole brushless Electronic Speed Control: Water resistant XP SC700 with cooling fan and removable tray for easy clean up and maintenance Radio: XP3-SS 2.4GHz 3-channel with S2008MG high-torque metal-gear steering servo Drive: Hybrid belt/gear drive, four wheel 5mm heavy duty belt system with external tension adjustment, CVAs with captured drive pins and heavy duty 6mm alloy axles Slipper Clutch: Decoupled design allows front and rear wheels to slip independently for greater traction and stability under bumpy conditions Differentials: Sealed, fluid filled, 32 pitch planetary gears Shocks: Oil-filled aluminum body 13mm big bore with low friction X- ring seals Body: Trimmed with Pro Comp paint scheme Receiver Box: Sealed, water resistant Steering: Angled bellcrank coplanar steering with servo saver, ball bearing equipped with adjustable steering stops Ball Bearings: Full set included Wheels: 12mm hex drive replica Tires: Multi terrain scale with reinforced sidewalls, 4.25 (108mm) diameter, 1.7 (43mm) wide Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle YOU WILL RECEIVE: RTR SC10 4x4 Short Course Racing Truck with painted Body, ESC, Brushless Motor, 2.4GHz Radio w/Steering Servo and Instruction Manual REQUIRES: AA Batteries: Eight AA Battery: 6-cell NiMH or 2-cell LiPo with Deans Ultra Plug Battery Charger: To match selected battery Building and track equipment SPECS: Vehicle- Length: 21.6 (550mm) Width: 11.5 (293mm) Weight: 6.1lbs (2775g) weight will vary slightly depending on electronics used Wheelbase: 12.9 (327mm) Internal Gear Ratio: 2.57:1 Body- Length 21.6 (550mm) Width 11.5 (293mm) at front fenders, widest point 8.8 (224mm) at center section, narrowest point COMMENTS: Available with the following race trimmed bodies; ASCD9005, Lucas Oil driven by Carl Renezeder ASCD9006 Pro Comp driven by Travis Coyne ASCD9007 Rockstar/Makita driven by Kyle and Todd Leduc For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x10mm Transmission 1 DTXC1561 2 3/16 x 3/8 Transmission 1 DTXC1423 2 3/16 x 3/8 Idler Gear 1 DTXC1423 4 3/16 x 3/8 Rear Hubs 2 DTXC1423 4 3/16 x 3/8 Front Hubs 2 DTXC1423 jxs 01/31/11 ir/jxs