Associated ASC80934

$439.98
Associated logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
discontinued SC8.2E 4wd RTR 1/8
Associated ASC80934 - discontinued SC8.2E 4wd RTR 1/8

Team Associated brand brushless electric powered, 2.4GHz radio controlled, 1/8 scale
Ready to Run SC8.2e Off-Road Race Truck from Associated
with the Lucas Slick Mist Graphics.
FEATURES:
Chassis: Hard anodized 7075-T6 aluminum 0.13(3.3mm) thick
with functional roll cage and integral dirt shields
Drive: Four wheel shaft
Motor: Reedy 2000kV brushless
Electronic Speed Control: 2S-4S LiPo compatible XPSC1300-BL
Radio: Associated XP-2SSi 2.4 GHz 2-channel radio with throttle/brake
ATV, high torque S2008MG metal gear steering servo
Shocks: Big Bore composite bodied oil filled with 4mm gold shafts
Shock Towers: Aluminum 0.12 (3mm) thick
Body: Lexan 0.06 (1.5mm) thick trimmed and painted with Lucas/
Slick Mist graphics
Spur Gear: Molded composite 46 tooth
Pinion Gear: 17 tooth
Receiver Box: Enclosed, receiver box, servo, and battery tray remove
from car in one piece for easy maintenance and cleaning
Battery Tray: Molded tray supports two ROAR-approved 7.4V LiPo packs
with room for foam pads, three hook and loop straps
Wheels: New Method 4.5 (115mm) diameter, 1.7 (42mm)
Suspension: Adjustable pivot height, RC8.2 championship suspension
geometry
Bumper: Front and rear composite construction with rear mud flaps
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis, caster blocks adjust 14, 16, or 18 degrees with molded
inserts
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Dual bell crank for more consistent steering and reduced
bump-steer
YOU WILL RECEIVE:
Associated Ready to Run SC8.2e Off-Road Race Truck w/painted body
brushless motor, ESC, 2.4GHz radio, steering servo and instruction
manual
REQUIREMENTS:
AA Batteries: Six for transmitter
Battery: 4S 14.8V /or 3S 11.1V LiPo battery pack with Deans Ultra
plug
Battery Charger: LiPo compatible
Building and track equipment
SPECIFICATIONS:
Vehicle-
length: 24.2 (616mm)
width: 12.24 (311mm)
Weight: 8.91lbs (4040g)
Wheelbase: 14.8 (375mm)
Gear Ratio: 4.30:1
Body-
length: 24 (610mm)
width: 11.4 (290mm)
height: 6.9 (175mm)
Thickness: 0.06 (1.5mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16mm Fr Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 6x10mm Steering 1 DTXC1561
4 5x8mm Steering 2 DTXC1523
4 8x16mm Fr Hubs 2 DTXC1585
2 8x16mm Rear Hubs 1 DTXC1585
2 15x21mm Rear Hubs 1 DTXC1601
2 8x16mm Rear Gearbox 1 DTXC1585
jxs 08/06/12
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov