Associated ASC80907

This is the electric powered, radio controlled, 1/8 scale
RC8.2E Factory Team Off-Road Competition Buggy Kit from Team Associated.
Chassis: 7075 hard anodized aluminum 0.14" (3.5mm) thick,
lengthened 3mm from original chassis, molded composite front and
rear chassis braces and radio tray
Drive: Four wheel shaft, Factory Team 7075 aluminum axles and center
drives, 3.5mm light CVA drivetrain with full ball bearings
Motor Mount: Factory Team sliding design, aluminum construction, blue
in color
Body: JConcepts clear Punisher Body and black plastic Illuzion wing
Differentials: Planetary gear
Shocks: Factory Team 16mm Big Bore hard anodized with 4mm titanium
nitride coated shafts, steel alum shock standoffs and 30wt
silicone shock oil
Shock Towers: Factory Team 0.20" (5mm) 7075 aluminum low-center-of-
gravity
Suspension: Factory Team 7075 blue aluminum mounts with new arms that
feature centerline shock mounts and optimized anti-roll bar
position
Steering: Factory Team 7075 blue aluminum steering knuckles
Ball Bearings: Full set included
Wheels: Dish type, white in color 17mm hex, 1.6" (49mm) wide, 3.3"
(83mm) diameter
Caster: Adjustable with caster blocks that adjust 14, 16, or 18 with
molded inserts, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
RC8.2E Factory Team Off-Road Buggy Kit with Wheels, Shock Oil, clear
Body, Rear Wing, Decals and Instruction Manual
Radio: 2-channel with high torque steering servo
Motor and ESC: brushless system for 1/8 scale buggy
Tires: 1/8 scale buggy
Battery: 2S-4S 7.4V LiPo pack
Battery Charger: LiPo compatible
Polycarbonate safe paint, building and track equipment
Vehicle;
length: 18.5" (470mm)
width: 12" (305mm)
Wheelbase: 12.7" (323mm)
Internal Gear Ratio: 4.30:1
Weight: 7.9lbs (3570g)
Body;
length: 14.6" (370mm)
width: 7.9" (200mm)
height: 4.4" (112mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Front Hubs 1 DTXC1585
2 15x21mm Front Hubs 1 DTXC1601
2 8x16mm Rear Bulkhead 1 DTXC1585
2 8x16mm Rear Hubs 1 DTXC1585
2 15x21mm Rear Hubs 1 DTXC1601
jxs 10/25/11
ir/jxs
&