Associated ASC7044

This is the electric powered, 2.4GHz radio controlled, 1/10 scale, ready to run SC10 Short Course Race Truck with Rockstar-Makita Trim from Associated. Chassis: Molded composite low CG design with side nerf bars, hinged battery hold down strap fits NiMH and LiPo battery packs Drive: Rear wheel with steel rear dogbone drive shafts Motor: Associated Reedy 3300kV brushless Radio: Associated XP3-SS 2.4GHz 3-channel system with metal gear steering servo ESC: Associated XP SC450-BL brushless compatible with LiPo cutoff Shocks: Oil-filled with blue aluminum bodies Body: 0.040" (1mm) thick painted and trimmed with Rockstar-Makita trim scheme Differential: Sealed, planetary gear Spur Gear: 87 tooth Slipper Clutch: Dual sided, externally adjustable Wheels: style, 3" (76mm) diameter, 1.6" (41mm) wide, black in color Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm) diameter, 1.7" (43mm) wide Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis, includes Factory Team Arm Mounts (ASCC7487) that allow four choices of rear toe-in for different track conditions Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Bumpers: Front and rear with functional rear rubber mud flaps Ball Bearings: 14 rubber sealed Suspension: Fully adjustable with steel turnbuckles Steering: Angled bellcrank "coplanar" steering with integral servo saver SC10 Short Course Race Truck from Associated with tires, wheels, painted body, brushless motor, 2.4GHz radio and instruction manual Battery: 6-7 cell NiMH stick pack or 2-cell LiPo pack Battery Charger: Depending on selected battery type Transmitter Batteries: Eight AA-size Building and track equipment Vehicle- Length: 21.6" (550mm) Width: 11.5" (293mm) Track: 9.6" (245mm) Weight: 4.6lbs (2080g) Wheelbase: 12.9" (327mm) Internal Gear Ratio: 2.6:1 Body- Length 21.6" (550mm) Width 11.5" (293mm) at front fenders, widest point 8.8" (224mm) at center section, narrowest point Height: 6" (153mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x10mm Transmission 1 DTXC1561 2 3/16 x 3/8" Transmission 1 DTXC1423 2 3/16 x 3/8" Idler Gear 1 DTXC1423 4 3/16 x 3/8" Rear Hubs 2 DTXC1423 4 3/16 x 3/8" Front Hubs 2 DTXC1423 Brushless powered SC10s with 2.4GHz radio systems are available with the following paint schemes; Lucas Oil, ASCC7040 Speed Tech, ASCC7041 Pro Comp, ASCC7043 Rockstar/Makita, ASCC7044 jxs 05/18/10 ir/jxs &