Associated ASC7042

This is the electric powered, 2.4GHz radio controlled, 1/10 scale, ready to run Associated SC10 Short Course Race Truck with the Rockstar Energy Drink Trim Scheme. Chassis: Molded composite low CG design with side nerf bars, hinged battery hold down strap fits NiMH and LiPo battery packs Drive: Rear wheel with steel rear dogbone drive shafts Motor: Associated Reedy Radon 17 turn Radio: Associated 2.4GHz XP3-SS 3-channel with throttle/brake ATV, metal gear steering servo and throttle fail-safe ESC: Associated XP SC200 forward/reverse with LiPo low voltage cut- off and reverse lockout Shocks: Oil-filled with blue aluminum bodies Body: 0.040" (1mm) thick painted and trimmed with Rockstar Energy Drink paint scheme Differential: Sealed, planetary gear Spur Gear: 87 tooth Slipper Clutch: Dual sided, externally adjustable Wheels: style, 3" (76mm) diameter, 1.6" (41mm) wide, black in color Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm) diameter, 1.7" (43mm) wide Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Bumpers: Front and rear with functional rear rubber mud flaps Ball Bearings: 14 rubber sealed Suspension: Fully adjustable with steel turnbuckles Steering: Angled bellcrank "coplanar" steering with integral servo saver SC10 Short Course Race Truck Kit from Associated with tires, wheels, painted body, motor, 2.4GHz radio, metal gear steering servo and instruction manual Battery: 6-7 cell NiMH stick pack or 2-cell LiPo pack LiPo pack Battery Charger: Depending on selected battery type Transmitter Batteries: Eight AA-size Building and track equipment Vehicle- Length: 21.6" (550mm) Width: 11.5" (293mm) Track: 9.6" (245mm) Weight: 4.6lbs (2080g) Wheelbase: 12.9" (327mm) Internal Gear Ratio: 2.6:1 Body- Length 21.6" (550mm) Width 11.5" (293mm) at front fenders, widest point 8.8" (224mm) at center section, narrowest point Height: 6" (153mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x10mm Transmission 1 DTXC1561 2 3/16 x 3/8" Transmission 1 DTXC1423 2 3/16 x 3/8" Idler Gear 1 DTXC1423 4 3/16 x 3/8" Rear Hubs 2 DTXC1423 4 3/16 x 3/8" Front Hubs 2 DTXC1423 The Associated SC10 is also available in kit form with unpainted body, ASCC7027. jxs 04/22/10 ir/jxs &