Associated ASC7034

This is the electric powered, radio controlled, 1/10 scale
SC10 Factory Team Short Course Race Truck Kit from Associated.
Chassis: Molded composite low CG design with side nerf-bars,
Drive: Rear wheel
Shocks: Factory Team threaded, oil-filled, dual cap hard anodized
shock bodies with Factory Team blue aluminum bushings and pivot
balls, gray rear and red front shock springs
Body: '09 championship racing body, 0.040" (1.02") thick
polycarbonate
Differential: Sealed, ball type with light weight outdrives
Spur Gears: Two, 75 tooth for brushless stock motors and 87 tooth for
brushed and modified motors
Motor Plate: Factory Team milled aluminum
Slipper Clutch: V-2 slipper assembly with high-rate spring and
Factory Team Gold pads
Battery Strap: Carbon fiber
Wheels: style, 3" (76mm) diameter, 1.6" (41mm) wide, black finish
Tires: JConcepts Subcultures with foam inserts, diameter 4.25"
(108mm), width 1.69" (43mm)
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with Factory Team blue titanium
turnbuckles and mounts for 4, 3.5, 3 and 2.5 rear toe included
Steering: Angled bellcrank "coplanar" steering with integral servo
saver
SC10 Short Course Race Truck Kit from Associated with tires, wheels,
foam inserts, unpainted body, instruction manual
decals, window mask sheet and shock oil
Radio: 2-channel with high torque steering servo
Transmitter Batteries: Eight AA-size
ESC: Associated XP SC200, ASCM9140
Motor: Reedy Radon 17T, ASCC9626 is ideal for this vehicle
Pinion Gear: 48 pitch, number of teeth to match selected motor and
spur gear, 24T gives good performace with motor listed above when
using the supplied 87T spur gear
Battery: 6-7 cell NiMh stick pack or 2-cell LiPo pack
Battery Charger: Depending on selected battery type
Building and track equipment
Vehicle-
length: 21.6" (550mm)
width: 11.5" (293mm)
Track: 9.6" (245mm) distance from outer wheel edges (side-to-side)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9" (327mm)
Internal Gear ratio: 2.6:1
Body-
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
height: 6" (153mm)
The DuraTrax Element 3900kV brushless System (DTXC3122) is an ideal,
afF0RDable upgrade for this vehicle.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423
jxs 04/26/10
ir/jxs
&