Associated ASC7029

Team Associated brand electric powered, radio controlled, 1/10 scale, ready to run SC10 Short Course Race Truck with the SC10 Team AE Body Trim from Associated. FEATURES: Chassis: Molded composite low CG design with side nerf-bars, hinged battery hold down strap fits NiMH and LiPo battery packs Drive: Rear wheel with steel rear dogbone drive shafts Motor: Associated Reedy Radon 17 turn Radio: Associated XP2 2-channel pistol grip with metal gear steering servo, transmitter does not have charge jack ESC: Associated XP SC200 forward/reverse with LiPo low voltage cut- off and reverse lockout Shocks: Oil-filled with blue aluminum bodies Body: 0.040 (1mm) thick painted and trimmed with SC10 Team AE trim Differential: Sealed, planetary gear Spur Gear: 87 tooth Slipper Clutch: Dual sided, externally adjustable Wheels: style, 3 (76mm) diameter, 1.6 (41mm) wide, black in color Tires: Multi terrain scale with reinforced sidewalls, 4.25 (108mm) diameter, 1.7 (43mm) wide Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Bumpers: Front and rear with functional rear rubber mud flaps Ball Bearings: 14 rubber sealed Suspension: Fully adjustable with steel turnbuckles Steering: Angled bellcrank coplanar steering with integral servo saver YOU WILL RECEIVE: SC10 Short Course Race Truck Kit from Associated with tires, wheels, painted body, motor, radio and instruction manual REQUIRES: Battery: 6-7 cell NiMH stick pack or 2-cell LiPo pack Battery Charger: Depending on selected battery type Transmitter Batteries: Eight AA-size Building and track equipment SPECS: Vehicle- Length: 21.6 (550mm) Width: 11.5 (293mm) Track: 9.6 (245mm) Weight: 4.6lbs (2080g) Wheelbase: 12.9 (327mm) Internal Gear Ratio: 2.6:1 Body- Length 21.6 (550mm) Width 11.5 (293mm) at front fenders, widest point 8.8 (224mm) at center section, narrowest point Height: 6 (153mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x10mm Transmission 1 DTXC1561 2 3/16 x 3/8 Transmission 1 DTXC1423 2 3/16 x 3/8 Idler Gear 1 DTXC1423 4 3/16 x 3/8 Rear Hubs 2 DTXC1423 4 3/16 x 3/8 Front Hubs 2 DTXC1423 The Associated SC10 is also available in kit form with unpainted body, ASCC7027. jxs 06/02/09 ir/jxs