Associated ASC7024

This is the electric powered, radio controlled ready to run
Team Associated RC10T4 RS (Race Spec) off-road racing truck.
Chassis: Molded composite, low center of gravity
Transmission: 2.6:1 laydown Stealth type, high-torque capacity
Bearings: Full set
Shocks: Oil-filled blue anodized aluminum (silver springs on front
and green springs on the rear)
Radio: Team Associated XP2 2-channel AM with metal gear servo,
transmitter has charge jack, can use Wall Charger (ASCM9833) if
rechargeable batteries are used (charger and batteries are not
included)
Speed Control: LRP Ai digital
Motor: Associated Reedy Radon 17 turn
Dog Bones: Steel dog bones (not CVDs)
Front Tires: Associated racing compound ribbed
Rear Tires: Associated racing compound bow-tie style
Wheels: White (dyeable) dish style 2.2" (56mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Angled-bellcrank design to minimize bump steer and maintain
constant steering angles throughout the range of suspension travel
Body: Painted racing truck style with rear wing
Slipper Clutch: High-torque capacity double-sided provides finer
adjustment
Impact-resistant rear motor guard
Adjustable battery position
Built-in servo saver
One pre-assembled RC10T4 RS with oil-filled shocks, tires, foam
wheels, 87 tooth Kimbrough 48 pitch spur gear, steel turnbuckles,
20 tooth pinion gear, 17 turn motor, electronic speed control,
2-ch pistol grip AM radio w/steering servo, painted body, nylon
tools (for turnbuckles, wheel nuts etc. ), hex wrench assortment,
decal sheet, and instructions for the model, speed control and
radio
Radio Batteries: (8) AA size
Six cell flat battery pack with standard connector
AC/DC charger timed or peak for 6-cell battery
Building and track equipment
length: 15.4" (394mm)
Rear Track: 12.75" (324mm)
Front Track: 13" (330mm)
height: 5.5" (140mm)
Wheelbase: 11.25" (286mm)
Ground Clearance: 1" (25.4mm)
It is not possible to request a specific color or radio channel when
ordering because they are supplied by the manufacturer at random.
If bearings are needed use:
Two DTXC1423 3/8 x 3/16 four needed, front wheels
Two DTXC1423 3/8 x 3/16 four needed, rear hub carriers
Two DTXC1423 3/8 x 3/16 four needed, transmission-top & middle
One DTXC1411 5/32 x 5/16 two needed, diff outdrives
One DTXC1437 3/8 x 5/8 two needed, ball diff
jxs 2/20/06
ajw 6/06/06
ir/jxs
&