Associated ASC30121

Team Associated is proud to release the newest edition to our lineup of 1:10 scale 4WD electric touring car kits, the TC7.1 Factory Team. An evolution of its successful predecessor, the TC7 FT, the TC7.1 FT car kit comes packed full of the Factory Team options necessary to keep you racing at the highest level!The touring car racing scene has evolved into a refined group of elite level race cars, and advancements in track surfaces and tire compounds have allowed the current generation of on-road cars more grip and higher corner speeds. The engineers behind the doors of Area-51 have been hard at work to make sure the TC7.1 has everything you need to keep you in front of the pack. The primary focus for the TC7.1 FT was to allow for a lower center of mass to take advantage of the higher grip levels. Starting with the ultra-smooth short FOX shocks with Genuine Kashima Coat mounted low on the chassis, and rounding out with DCV drive shafts for the front end, no corners were left untouched to make the smoothest power delivery and optimal load transfer. Other key features include a narrow chassis with optimized flex characteristics, one-piece motor mount, floating servo mount, and rear gear diff for maximum performance and minimal maintenance. A brilliant successor with a well-rounded evolution, it's easy to see that the TC7.1 FT kit is another Champion by Design!
Chassis: Graphite laminate 0.088 (2.25mm) thick with optimized
flex characteristics
Drive: Four wheel belt drive, DCV front driveshaft assemblies
Rear Differential: Gear type
Shocks: Fox shocks with genuine Kashima coat
Motor Mount: Redesigned one-piece, centrally located to produce the
most consistent chassis flex for predictable cornering
Steering: Updated dual bellcrank system with low CG and refined
Ackermann range for best performance on any track condition,
Ackermann refers to the effect of the inside wheel front wheel
turning faster than the outside front wheel during turns, floating
steering servo mount
Bumper: Front foam
Turnbuckles: Titanium for strength and light weight
Ball Bearings: Full set, 22 total
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

RC10TC7.1 Factory Team Touring Car Kit, Shocks, bottle of Silicone
Shock Fluid and Silicone Diff Fluid, Decal Sheet and Instruction
Manual

Radio: 2-channel with high-speed steering servo
Motor: 540 size brushless
ESC: To match selected motor
Battery: 3.7V-7.4V LiPo, or 6.0V LiFe
Battery Charger: To match selected battery
LiPo Charging Bag: If using LiPo battery
Pinion Gear: 48 pitch, number of teeth to be determimed by motor and
track conditions
Tires and Wheels: 1/10 scale touring car
Body: 1/10 scale polycarbonate touring car
Paint, building and track equipment

length: 14.17 (360mm)
width: 7.48 (190mm)
Wheelbase: 9.9 - 10.1 (253.5 - 257.5mm)
Internal Gear Ratio: 2.0:1
Weight: 1.12lbs (508g)