Arrma ARA390264
$126.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.AR390264 BLX120 brushless 4S ESC
The BLX120 120A waterproof ESC provides consistent power control and is 4S LiPo ready.
Fitted with super-reliable EC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX120 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
-
The fitted 12AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
- Battery USAge: 3S LiPo (11.1V) or 4S LiPo (14.8V)
- Low Voltage Cut-Off (LVC): 3.4V per cell
- Thermal Protection Temperature: 125C / 257F
- Over-Voltage Protection: Over 17.2V
- BEC Voltage: 6V
- BEC Current: 3A
- ESC length: 43mm / 1.69"
- ESC height: 34mm / 1.34"
- ESC width: 54.5mm / 2.15" (Including hold-down tabs)
- ESC Weight: 150g / 5.3 oz
- Receiver Wire length: 170mm / 6.70"
- Battery Wire length: 225mm / 8.86"
- Motor Wire Length (Including Connector): 200mm / 7.87"
- Switch length: 21mm / 0.83"
- Switch width: 13.3mm / 0.52"
- Switch height: 16mm / 0.63"
- Motor Bullet Connector Size: 4mm / 0.16"
- ESC Battery Connector Type: 2xEC5
1 x BLX120 brushless 4S ESC
1 x Loop Connector
FEATURES:
Fitted with super-reliable EC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX120 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
-
The fitted 12AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
SPECIFICATIONS:
- Battery USAge: 3S LiPo (11.1V) or 4S LiPo (14.8V)
- Low Voltage Cut-Off (LVC): 3.4V per cell
- Thermal Protection Temperature: 125C / 257F
- Over-Voltage Protection: Over 17.2V
- BEC Voltage: 6V
- BEC Current: 3A
- ESC length: 43mm / 1.69"
- ESC height: 34mm / 1.34"
- ESC width: 54.5mm / 2.15" (Including hold-down tabs)
- ESC Weight: 150g / 5.3 oz
- Receiver Wire length: 170mm / 6.70"
- Battery Wire length: 225mm / 8.86"
- Motor Wire Length (Including Connector): 200mm / 7.87"
- Switch length: 21mm / 0.83"
- Switch width: 13.3mm / 0.52"
- Switch height: 16mm / 0.63"
- Motor Bullet Connector Size: 4mm / 0.16"
- ESC Battery Connector Type: 2xEC5
YOU WILL RECEIVE:
1 x BLX120 brushless 4S ESC
1 x Loop Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov