Tamiya TAM58556
$193.20

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1:10 Farm King Wheelsie Tractor Wr02 2WD Kit
This is the 1/10 scale, radio controlled, electric powered,
Tamiya Farm King Wheelie kit.
For ages 14 and above
Drive: Rear wheel
Electronic Speed Control: Tamiya TEU-105BK with reverse (TAMC5055)
Motor: 540 brushed, preinstalled to assembled gearbox
Suspension: Four wheel double wishbone
Differential: Bevel gear
Body; Clear polycarbonate
Driver Figure: Molded white plastic
Shocks: Coil over plastic body friction, not oil-filled
Wheels: One-piece white plastic, 12mm hex
Tires: Front, outer diameter 3.8" (97mm), 2.1" (54mm) wide
Rear spike, outer diameter 5.1" (130mm), 2.2" (56mm) wide
Steering: Direct servo with tie rods
Front Bumper: Spring type to absorb minor impacts
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Adjustable, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
in relation to the chassis
18T pinion gear, tires, wheels, shocks, decal sheet, and
instruction manual
Battery: 7.2V stick pack with standard connector
Battery Charger: To match selected battery
AA batteries, paint, building and track equipment
length: 14.3" (363mm)
width: 9.9" (253mm)
height: 9.6" (245mm)
Body-
length: 14.1" (359mm)
width: 9.4" (240mm) at widest point
height: 8.5" (216mm) measured at cab enclosure
Qty. Size Location Qty. Bearing Set
2 5x11mm Rear Uprights 1 DTXC1547
4 5x11mm Front Uprights 2 DTXC1547
8 5x11mm Front Uprights 4 DTXC1547
To paint model to match photos on box, use
PS-25 Bright Green, TAMR8625
X-11 Chrome Silver, TAMR1511
X-18 Semi Gloss Black, TAMR1518
XF-15 Flat Flesh, TAMR1715
jxs 03/19/13
ir/jxs
&
Tamiya Farm King Wheelie kit.
For ages 14 and above
FEATURES:
Chassis: WR-02G monocoque with wheelie bar Drive: Rear wheel
Electronic Speed Control: Tamiya TEU-105BK with reverse (TAMC5055)
Motor: 540 brushed, preinstalled to assembled gearbox
Suspension: Four wheel double wishbone
Differential: Bevel gear
Body; Clear polycarbonate
Driver Figure: Molded white plastic
Shocks: Coil over plastic body friction, not oil-filled
Wheels: One-piece white plastic, 12mm hex
Tires: Front, outer diameter 3.8" (97mm), 2.1" (54mm) wide
Rear spike, outer diameter 5.1" (130mm), 2.2" (56mm) wide
Steering: Direct servo with tie rods
Front Bumper: Spring type to absorb minor impacts
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Adjustable, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
in relation to the chassis
YOU WILL RECEIVE:
Tamiya Farm King Wheelie kit with brushed motor, ESC, clear body, 18T pinion gear, tires, wheels, shocks, decal sheet, and
instruction manual
REQUIREMENTS:
Radio: 2-channel with high torque steering servo Battery: 7.2V stick pack with standard connector
Battery Charger: To match selected battery
AA batteries, paint, building and track equipment
SPECIFICATIONS:
Vehicle- length: 14.3" (363mm)
width: 9.9" (253mm)
height: 9.6" (245mm)
Body-
length: 14.1" (359mm)
width: 9.4" (240mm) at widest point
height: 8.5" (216mm) measured at cab enclosure
COMMENTS:
To Upgrade to Ball Bearings use: Qty. Size Location Qty. Bearing Set
2 5x11mm Rear Uprights 1 DTXC1547
4 5x11mm Front Uprights 2 DTXC1547
8 5x11mm Front Uprights 4 DTXC1547
To paint model to match photos on box, use
PS-25 Bright Green, TAMR8625
X-11 Chrome Silver, TAMR1511
X-18 Semi Gloss Black, TAMR1518
XF-15 Flat Flesh, TAMR1715
jxs 03/19/13
ir/jxs
&