Tamiya TAM58555

This is the electric powered, radio controlled, 1/12 scale Mazda 787B No.18 On-Road Race Car Kit. Chassis: RM-01 0.098" (2.5mm) thick FRP lower deck Drive: Rear wheel direct, steel rear axle Motor: 380 size brushed (540 motor, not included, can be installed with the removal of motor plate adapter) Front Suspension: Independent design with optimized kingpin trail for increased stability Rear Suspension: Pivot-Ball Link Rear (PBLR) with center pivot ball pitch damper to control chassis pitch, roll damper and side links to control chassis roll Differential: Ball type Wheels: White plastic 1.4" (36.2mm) diameter, front 0.94" (24mm) wide rear, 1.4" (35.5mm) wide, hex hub type and 3-screw wheels can be used with this chassis Tires: High grip sponge design 1.9 (47.5mm) outer diameter, front 0.98" (25mm) wide, rear 1.2" (32mm) wide Body: Clear untrimmed polycarbonate plastic with white plastic helmeted driver head Spur Gear: Plastic 63T 06 module Mazda 787 No. 18 On-Road Race Car Kit, Tires, Wheels, Body, Decals 14T Pinion Gear and Instruction Manual Radio: 2-channel with standard size steering servo Battery: 2S 7.4V LiPo (#55105 6.6V LiFe battery recommended by Tamiya not available in USA) ESC: Compatible with included motor Battery Charger: LiPo compatible Polycarbonate safe spray or brush on paint Building and track equipment Vehicle Wheelbase: 7.9" (201mm) Body; Length: 12.1" (308mm) Width: 6.8" (174mm) Height: 2.8" (71mm) To replace Ball Bearings use: Qty. Size Location Qty. Bearing Set 1 6x12mm Ball Diff 1 DTXC1569 1 6x10mm Ball Diff 1 DTXC1561 1 5x11mm Ball Diff 1 DTXC1547 2 6x10mm Rear Wheels 1 DTXC1561 4 5x11mm Front Wheels 1 DTXC1547 jxs 01/30/13 ir/jxs &