Tamiya USA TAM58543

$154.99
Tamiya USA logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
Subaru BRZ R & D Sport TT-01E 4WD On-Road Kit
Tamiya USA TAM58543 - Subaru BRZ R & D Sport TT-01E 4WD On-Road Kit
This is the radio controlled, electric powered 1/10 scale,
Subaru BRZ R & D Sport TT-01E 4WD On-Road Kit
This car can be used in Tamiya Official Races.

FEATURES:
Chassis: TT-01 type E composite chassis-compatible with a variety of
Tamiya Option Parts
Drive: Four wheel shaft drive
Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541
Motor: 540 motor with pre-attached leads
Ball Bearings: Installed in differentials, bushings in wheel hubs
Shocks: Friction, plastic body
Gearbox: Sealed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: Clear untrimmed, with window mask and body trim decals
Tires: Slick 1.0" (26mm) wide, 2.6" (65.5mm) diameter
Wheels: Matte chrome 2.0" (52mm) outer diameter, 0.94" (24mm) wide
+2 offset and black colored set with zero offset
Bumper: Front foam
Suspension: Independent double wishbone
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
Subaru BRZ 540 motor, ESC, clear body, tires, foam bumper, 19 tooth
pinion gear, 61 tooth spur gear, window mask decals,
wheels and instruction manual
REQUIREMENTS:
Radio: 2-channel with one standard servo
Radio Batteries: 8 AA size (for transmitter)
Battery: 6-cell stick pack with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
SPECIFICATIONS:
VEHICLE-
length: 15.7" (400mm)
width: 7.2" (183mm)
height: 5.5" (140mm)
Wheelbase: 10.1" (257mm)
BODY-
length: 17.1" (435mm)
width: 7.3" (185mm)
height: 3.8" (97mm)
COMMENTS:
For replacement, or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Front Hubs 1 DTXC1547
2 5x11mm Rear Hubs 1 DTXC1547
2 8x12mm Front Diff 1 DTXC1581
2 8x12mm Rear Diff 1 DTXC1581
2 5x11mm Fr Driveshaft Joint 1 DTXC1547
2 5x11mm Rear Driveshaft Joint 1 DTXC1547
Body shown on box is painted red and silver with all sponsor decals
applied
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov