Tamiya TAM57866

This is the Radio Controlled, Electric Powered, 1/10 scale, Ready to Run Porsche Carrera RSR On-Road Car from Tamiya. Chassis: Plastic, TT-02 bathtub type Drive: Four wheel drive, dogbone Motor: Torque-Tuned 540 size brushed Radio: Tamiya Finespec 2.4GHz ESC: TEU-105BK with reverse Differential: Gear type Suspension: Fully independent double wishbone Shocks: Plastic body, friction (not oil filled) Tires: Slick rubber 2.5" (65mm) diameter, front width 1" (25.4mm) rear width 1.2" (32mm) Wheels: Five spoke plastic, gray in color Steering: Bellcrank type Body: Polycarbonate, with all body trim and rear wing Spur Gear: 70 tooth plastic Pinion Gear: 22 tooth metal Bumper: Front foam Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable front only, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis TT-02 Factory Finished On-Road Chassis with Brushed Motor, ESC, Body, Decals, 2.4GHz Radio, and Instruction Manual Radio: 2-ch with steering servo Battery: 7.2V stick pack with standard connector Battery Charger: For selected batery pack Track and maintenance equipment Vehicle- Specs such as length and height not provided by manufacturer Wheelbase: 10" (251mm) Body- Length: 17.9" (454mm) Width: 7" (176mm) behind front wheels, narrowest point 8" (203mm) at rear wheels, widest point Height: 4.5" (114mm) To upgrade to ball bearings order; Qty. Size Location Qty Bearing Set 2 5x11mm Spur Gear 1 DTXC1547 2 5x11mm Drive Shaft 1 DTXC1547 2 8x12mm Differential 1 DTXC1581 2 5x10mm Front Uprights 1 DTXC1535 2 5x10mm Rear Uprights 1 DTXC1535 jxs 10/02/13 ir/jxs &