Hot Bodies HBS113391
$599.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1/8 D8T Tessmann Edition Racing Nitro Kit
Hot Bodies brand 1/8 Scale, Glow Powered, Radio Controlled,
Hot Bodies Off-Road D8T Tessmann Edition Truggy Kit.
FEATURES:
Chassis: 0.16 (4mm) thick 7075 aluminum with 10? of kickup,
composite chassis braces
Drive: Four wheel shaft drive, lightweight aluminum axles
Engine Mount: One-piece CNC aluminum
Fuel Tank: 5.1oz (150cc) plastic with flip top cap
Air Filter: Foam low profile design
Clutch: 3 shoe, plastic construction
Clutch Bell: 13 tooth steel
Transmission: Single speed
Ball Bearings: Full set
Hubs: CNC aluminum with hinge pin inserts, aluminum front hub
carriers and caster blocks
Shocks: Oil-filled, 16mm Big Bore aluminum bodied
Shock Towers: Carbon fiber
Main Gear: 50 tooth lightweight
Gearboxes: Sealed
Differentials: Planetary
Brakes: Dual fiber discs
Body: Clear ProLine Bulldog cab-forward racing body, with Upgrade
R/C Vortex Wing
Bumpers: Front hardened plastic
Suspension: Captured hinge pin design, extra wide pivot block for
optimized geometry, front and rear sway bars, lightweight
aluminum pivot balls, wide stance solid arms
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ackermann: Adjustable, Ackermann refers to the effect of the inner
front wheel turning faster than the outer front wheel during turns
Steering: Bell crank type with servo saver, CNC machined billet
aluminum steering blocks, servo saver dust boot
Warranty Period: Two year limited, valid only in the U.S. Canada, and
South America
YOU WILL RECEIVE:
1/8 scale Hot Bodies off-road Truggy Kit, foam air filter, body,
rear wing, clutch bell, spur gear, instructions, decal sheet,
diff and shock oil
REQUIREMENTS:
Radio: 2-Channel with 2 Servos (one high torque servo for steering)
Radio Batteries: (8) AA size
Receiver Pack: 6V hump
Engine: .21-.28 cu in (3.4-4.6cc) rear exhaust
Exhaust: Tuned pipe
Engine Starter: Hand-held type with rubber adapter for vehicle use
Wheels: 1/8 scale off-road truggy
Tires: 1/8 scale off-road truggy
Glow Starter: 1.2 volt
Paint: Polycarbonate safe for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
SPECIFICATIONS:
Vehicle-
Length: 21 (530mm) from front bumper to end of rear wing
Width: 15.9 (405mm)
Weight: 9lbs (4082g) approximately
Wheelbase: 15-15.1 (380.5-383.5mm) wheels on-center front-to-rear
Gear Ratio: 4.3:1
Body-
Length: 18.2 (462mm)
Width: 7.4 (188mm) at middle section (widest point)
6.9 (175mm) ahead of front wheels (thinnest point)
Height: 4.1 (105mm)
COMMENTS
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Steering 1 DTXC1561
6 8x16mm Diffs 3 DTXC1585
2 5x11mm Clutch 1 DTXC1547
4 8x14mm Front Hubs 2 DTXC1583
4 8x14mm Rear Hubs 2 DTXC1583
jxs 11/11/14
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Hot Bodies Off-Road D8T Tessmann Edition Truggy Kit.
FEATURES:
Chassis: 0.16 (4mm) thick 7075 aluminum with 10? of kickup,
composite chassis braces
Drive: Four wheel shaft drive, lightweight aluminum axles
Engine Mount: One-piece CNC aluminum
Fuel Tank: 5.1oz (150cc) plastic with flip top cap
Air Filter: Foam low profile design
Clutch: 3 shoe, plastic construction
Clutch Bell: 13 tooth steel
Transmission: Single speed
Ball Bearings: Full set
Hubs: CNC aluminum with hinge pin inserts, aluminum front hub
carriers and caster blocks
Shocks: Oil-filled, 16mm Big Bore aluminum bodied
Shock Towers: Carbon fiber
Main Gear: 50 tooth lightweight
Gearboxes: Sealed
Differentials: Planetary
Brakes: Dual fiber discs
Body: Clear ProLine Bulldog cab-forward racing body, with Upgrade
R/C Vortex Wing
Bumpers: Front hardened plastic
Suspension: Captured hinge pin design, extra wide pivot block for
optimized geometry, front and rear sway bars, lightweight
aluminum pivot balls, wide stance solid arms
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ackermann: Adjustable, Ackermann refers to the effect of the inner
front wheel turning faster than the outer front wheel during turns
Steering: Bell crank type with servo saver, CNC machined billet
aluminum steering blocks, servo saver dust boot
Warranty Period: Two year limited, valid only in the U.S. Canada, and
South America
YOU WILL RECEIVE:
1/8 scale Hot Bodies off-road Truggy Kit, foam air filter, body,
rear wing, clutch bell, spur gear, instructions, decal sheet,
diff and shock oil
REQUIREMENTS:
Radio: 2-Channel with 2 Servos (one high torque servo for steering)
Radio Batteries: (8) AA size
Receiver Pack: 6V hump
Engine: .21-.28 cu in (3.4-4.6cc) rear exhaust
Exhaust: Tuned pipe
Engine Starter: Hand-held type with rubber adapter for vehicle use
Wheels: 1/8 scale off-road truggy
Tires: 1/8 scale off-road truggy
Glow Starter: 1.2 volt
Paint: Polycarbonate safe for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
SPECIFICATIONS:
Vehicle-
Length: 21 (530mm) from front bumper to end of rear wing
Width: 15.9 (405mm)
Weight: 9lbs (4082g) approximately
Wheelbase: 15-15.1 (380.5-383.5mm) wheels on-center front-to-rear
Gear Ratio: 4.3:1
Body-
Length: 18.2 (462mm)
Width: 7.4 (188mm) at middle section (widest point)
6.9 (175mm) ahead of front wheels (thinnest point)
Height: 4.1 (105mm)
COMMENTS
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Steering 1 DTXC1561
6 8x16mm Diffs 3 DTXC1585
2 5x11mm Clutch 1 DTXC1547
4 8x14mm Front Hubs 2 DTXC1583
4 8x14mm Rear Hubs 2 DTXC1583
jxs 11/11/14
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov