HPI HPI113076
$54.98
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued SC-3SWP Waterproof ESC Crawler King
HPI Racing brand HPI SC-3s Waterproof Electronic Speed Control.
FEATURES:
For use with brushed motors down to 12 turns
Ideal for all 1/10 scale vehicles powered by brushed motors
May be powered by 2-3S LiPos, or 5-9 cell NiMH/NiCd cells
Waterproof for safe driving in wet conditions
Fail-safe protection if throttle signal is lost for more than 0.1
second
Reverse function enabled or disabled, and LiPo or NiMH/NiCd
operation can be selected with included jumper plugs
Automatic throttle range calibration
Built-in capacitors prevent signal loss due to low voltage
Low voltage cutoff
Thermal overheating protection
YOU WILL RECEIVE:
HPI SC-3s ESC with Battery, Motor and Receiver Connectors and
Instruction Sheet
SPECIFICATIONS:
Forward Continuous Current: 40A
Forward Burst Current: 180A
Reverse Continuous Current: 20A
Reverse Burst Current: 90A
Input: 2-3S LiPo, 5-9 cell NiMH/NiCd
Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor greater
than or equal to 12 turn, RPM over 30,000 at 7.2v
3S LiPo or 9 cell NiMH: 540 or 550-size motor greater
than or equal to 18 turn, RPM over 20,000 at 7.2v
Battery Connector: Kyosho type
Battery Lead Wire Size: 16AWG
Motor Lead Wire Size: 16AWG
Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm
PWM Frequency: 1 KHz
Dimensions: 1.8 x 1.3 x 1.1 (46.5 x 34 x 28.5mm)
Weight: 2.3oz (65g)
COMMENTS
Standard Male Plug to Dean's Ultra connector (DTXC2209) required if
using LiPo batteries with Dean's connector.
jxs 02/17/15
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
FEATURES:
For use with brushed motors down to 12 turns
Ideal for all 1/10 scale vehicles powered by brushed motors
May be powered by 2-3S LiPos, or 5-9 cell NiMH/NiCd cells
Waterproof for safe driving in wet conditions
Fail-safe protection if throttle signal is lost for more than 0.1
second
Reverse function enabled or disabled, and LiPo or NiMH/NiCd
operation can be selected with included jumper plugs
Automatic throttle range calibration
Built-in capacitors prevent signal loss due to low voltage
Low voltage cutoff
Thermal overheating protection
YOU WILL RECEIVE:
HPI SC-3s ESC with Battery, Motor and Receiver Connectors and
Instruction Sheet
SPECIFICATIONS:
Forward Continuous Current: 40A
Forward Burst Current: 180A
Reverse Continuous Current: 20A
Reverse Burst Current: 90A
Input: 2-3S LiPo, 5-9 cell NiMH/NiCd
Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor greater
than or equal to 12 turn, RPM over 30,000 at 7.2v
3S LiPo or 9 cell NiMH: 540 or 550-size motor greater
than or equal to 18 turn, RPM over 20,000 at 7.2v
Battery Connector: Kyosho type
Battery Lead Wire Size: 16AWG
Motor Lead Wire Size: 16AWG
Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm
PWM Frequency: 1 KHz
Dimensions: 1.8 x 1.3 x 1.1 (46.5 x 34 x 28.5mm)
Weight: 2.3oz (65g)
COMMENTS
Standard Male Plug to Dean's Ultra connector (DTXC2209) required if
using LiPo batteries with Dean's connector.
jxs 02/17/15
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov