Associated ASC7027
$148.19

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Sc10 2wd Race Truck Kit
This is the electric powered, radio controlled, 1/10 scale
SC10 Short Course Race Truck Kit from Associated.
Chassis: Molded composite low CG design with side nerf bars,
hinged battery hold down strap fits up to 8-cell battery pack
Drive: Rear wheel
Shocks: Oil-filled with blue aluminum bodies with 30wt silicone shock
oil
Body: Clear .040" (1.01mm) thick polycarbonate SC10 race truck
Differential: Sealed, planetary gear
Spur Gears: Two, 75 tooth for brushless stock motors and 87 tooth for
brushed and modified motors
Slipper Clutch: Dual sided, externally adjustable
Wheels: style, 3" (76mm) diameter, 1.6" (41mm) wide, brushed
chrome finish
Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm)
diameter, 1.7" (43mm) wide
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with steel turnbuckles
Steering: Angled bellcrank "coplanar" steering with integral servo
saver
SC10 Short Course Race Truck Kit from Associated with tires, wheels,
foam inserts, unpainted body, two spur gears, instruction manual
decals, window mask sheet and shock oil
Radio: 2-channel with high torque steering servo
Transmitter Batteries: Eight AA-size
ESC: Associated XP SC200, ASCM9140
Motor: Reedy Radon 17T, ASCC9626 is ideal for this vehicle
Pinion Gear: 48 pitch, number of teeth to match selected motor and
spur gear, 24T gives good performace with motor listed above when
using the supplied 87T spur gear
Battery: 6-7 cell NiMH stick pack or 2-cell LiPo pack
Battery Charger: Depending on selected battery type
Building and track equipment
Vehicle-
Length: 21.6" (550mm)
Width: 11.5" (293mm)
Track: 9.6" (245mm)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9" (327mm)
Internal Gear ratio: 2.6:1
Body-
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
Height: 6" (153mm)
The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
afF0RDable upgrade for this vehicle.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423
The Associated SC10 is also available Ready To Run with the following
different paint schemes;
Lucas Oil, Wheel Body Trim, ASCD30**
Pro Comp,
SC10 Team AE, ASCD29** Ready Lift, ASCD32**
jxs 01/30/09
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS: