A Lipo charger like the Duratrax ICE (DTXP4170) and a balancing module like the Equinox Lipo Cell Balancer (GPMM3160) Soldering connectors onto the leads

SPECIFICATIONS:

Length: 138mm (5.4") Width: 46mm (1.8") Height: 24.5 (0.96") Lead Wire Size: 12 AWG Lead Wire Length: 100mm (3.9") Charge Rate: 10 Amps (2C) Discharge Rate: 35C (175A) continuous, 60C (300A) burst Max Volts Per Cell: 4.2V Max Pack Voltage: 8.4V Min. Discharge Volts: 6.0V

COMMENTS:

ALWAYS use a LiPo-approved charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.20V per cell NEVER Charge at currents greater than 1C NEVER Charge through the "To ESC or "DISCHARGE" lead NEVER Trickle Charge NEVER allow to Discharge below 2.8V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during Charging ALWAYS charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children cnh 1/28/09 ir/jxs &

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov