Hot Racing SARM357
$18.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.32p HD Steel 57t Spur Gear Arrma 2WD
Optional Hot Racing Hardened Steel 32P 57T Spur Gear for use on the Arrma 1/10 2WD
Specially make to handle brushless power
Rugged 0.8 Module/32pitch teeth for total reliability for brush-less power
Thickness: 5.5mm (0.22 inch)
Tooth: 57
Pitch: 32
Mod 0.8
- Some brush motor cars use 48 pitch gears normally.
- This replace stock part number 310405.
brushless Stock Set up : -
Raider
32 Pitch
Spur Gear 54 t - Pinion 17 T
Granite
32 Pitch
Spur Gear 57 t - Pinion 13 T
Fury, Raider XL, Vorteks
32 pitch
Spur Gear 57 t - Pinion 15 T
description revised by: DB November 3, 2016
Specially make to handle brushless power
FEATURES:
Hardened steel constructionRugged 0.8 Module/32pitch teeth for total reliability for brush-less power
YOU WILL RECEIVE:
One 32P 56T Spur GearREQUIREMENTS:
Installation on the vehicleSPECIFICATIONS:
Outer diameter: 46.8mm (1.8 inches) Thickness: 5.5mm (0.22 inch)
Tooth: 57
Pitch: 32
Mod 0.8
COMMENTS:
- Must USE with .08 Module Gear (32 Pitch Pinion Gear)- Some brush motor cars use 48 pitch gears normally.
- This replace stock part number 310405.
brushless Stock Set up : -
Raider
32 Pitch
Spur Gear 54 t - Pinion 17 T
Granite
32 Pitch
Spur Gear 57 t - Pinion 13 T
Fury, Raider XL, Vorteks
32 pitch
Spur Gear 57 t - Pinion 15 T
description revised by: DB November 3, 2016
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov