RC Lights RCL5324

*Brightest LEDs Industry Wide
*Adjustable Rate Strobes & Beacon
*TX/RX Control Built Right In
*Simple & Easy Installation
*Powers Directly From the RX
*All Mounting Hardware Included
*Fast Body Removal Use RCL5324 to install 2 red & 2 green directional navigation lights; 2 white adjustable wingtip strobes; 2 white adjustable tail strobes; 2 red adjustable rotating beacon strobe lights; and 4 white landing lights (switched from the TX) to any 48" span R/C airplane, helicopter, or boat. Includes the NIGHTFLY™ 14 LED Controller that can be switched on/off from the TX using a spare 2-position switch. Use wire extensions for larger scale craft. Powered directly from the RX or optional battery source. Everything needed for a complete installation is included with every lighting system! Includes: Instruction Set - (1) NIGHTFLY™ 14 LED controller RCL5056 (1) 4P Power Plug - (8) 14" wire extensions             RCL539014  (6) 24" wire extensions             RCL539024 (4) 5mm red constant LED        RCL5290R  (2) 5mm green constant LED     RCL5290G (8) 5mm white constant LED      RCL5290W (14) standard 5mm LED holders RCL5082  (14) 2P connector housings - (1) 3.75"x3" aluminum tape        RCL5080 (14) zip ties & bases Specs: SYSTEM CURRENT DRAW (@6V): 110mA with landing lights off; 170mA with landing lights on (A standard servo draws approx. 350mA) LED Controller INPUT VOLTAGE: 3.6-7.4V [6V Optimal] TYP OUTPUT CURRENT (per LED channel): 20-30mA DIMENSIONS: 1.65" x 1.0" x 0.25" Blue, Green, White, White Strobe, Red Strobe LEDs FORWARD VOLTAGE: 3.2V MAX CURRENT: 30mA Amber, Red LEDs FORWARD VOLTAGE: 1.9V MAX CURRENT: 30mA
*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
*DO NOT look directly into beam.