RC Lights RCL5422E
$27.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Electronic Brake Lights Red 3mm 14
Product Features
*Brightest LEDs Industry Wide
*Dual Intensity Brake Light Action
*Simple & Easy Installation
*Powers Directly From the RX
*All Mounting Hardware Included
*Fast Body Removal Overview This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights! Use RCL5422E to add 2 3mm red LED lights to RPM Tail Light Canisters. OR Use RCL5422E to install 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channels for adding an additional brake light. EBS switch is included for dual-intensity brake light action, just like a real car. Compatible with RPM Tail Light Set RPM81030
Direct fit for Slash & SC10 Bumpers. To change tail lights to be 5mm in size use 5mm LEDs. Everything needed for a complete installation is included with every lighting system! SYSTEM CURRENT DRAW (@6V): 55mA (A standard servo draws approx. 350mA) RX Direct2LED INPUT VOLTAGE: 3.6-7.4V [6V Optimal] TYP OUTPUT CURRENT (per LED channel): 20-30mA Electronic Brake Switch INPUT VOLTAGE: 4.8-6.0V MAX OUTPUT CURRENT: 1.2A Blue, Green, White, White Strobe, Red Strobe LEDs FORWARD VOLTAGE: 3.2V MAX CURRENT: 30mA Amber, Red LEDs FORWARD VOLTAGE: 1.9V MAX CURRENT: 30mA
*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
*DO NOT look directly into beam.
*Brightest LEDs Industry Wide
*Dual Intensity Brake Light Action
*Simple & Easy Installation
*Powers Directly From the RX
*All Mounting Hardware Included
*Fast Body Removal Overview This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights! Use RCL5422E to add 2 3mm red LED lights to RPM Tail Light Canisters. OR Use RCL5422E to install 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channels for adding an additional brake light. EBS switch is included for dual-intensity brake light action, just like a real car. Compatible with RPM Tail Light Set RPM81030
Direct fit for Slash & SC10 Bumpers. To change tail lights to be 5mm in size use 5mm LEDs. Everything needed for a complete installation is included with every lighting system!
YOU WILL RECEIVE:
Instruction Set - (1) RX Direct2LED RCL5075 (1) electronic brake switch RCL5092 (2) 14" wire extensions RCL539014 (2) 3mm red tail lights RCL5280R (2) standard 3mm LED holders RCL50823 (2) 2P connector housings - (1) 3.75"x3" aluminum tape RCL5080 (4) zip ties & bases SPECIFICATIONS:
*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
*DO NOT look directly into beam.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov