RC4WD RC4Z-K0060
$349.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Rc4wd Gelande Ii Truck Kit 1:10 Chassis Kit
Are you ready for your off-road experience?
Custom Designed for True To Scale Looks
Realistic Aluminum Ladder Frame Chassis
R3 Single Speed Transmission
Center Mounted Realistic 4x4 Transfer Case
Cast Metal Axles with Locked Differentials
3 Link Front and 4 Link Rear Suspension
1.9" Stamped Steel Beadlocks w/Lug Nuts
Super Grip Dirt Grabber Tires
Chassis Mounted Steering Servo
Dual Spring 80mm Scale Black Shocks
1x RC4WD Gelande II Truck Kit 1/10 Chassis Kit
This chassis kit requires building time of approximately 2-3 hours depending on your experience level
While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.
Spare Wheel and Tire not included
Fits RC4WD ARB Front Winch Bar Bumper for Gelande II D90/D110 (Z-S0853) and RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), but should work with RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168).
Required to Complete:
Truck Kit
Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)
Electronics:
Motor (35t, 45t, or 55t)
Electronic Speed Controller "ESC" (Z-E0007)
Radio and Receiver (2 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
1x Standard Size Servo (Z-E0035)
Battery (Consult your "ESC" manual) Z-E0090 or 2 cell Lipo battery
Charger (Consult your battery guide) Chargers
Possible Body Part Numbers:
Gelande II D90 Hard Plastic Body Kit (Z-B0008)
1/10 Gelande II D90 Limited Edition Pre-painted Green Body (Z-B0062)
Custom Designed for True To Scale Looks
Realistic Aluminum Ladder Frame Chassis
R3 Single Speed Transmission
Center Mounted Realistic 4x4 Transfer Case
Cast Metal Axles with Locked Differentials
3 Link Front and 4 Link Rear Suspension
1.9" Stamped Steel Beadlocks w/Lug Nuts
Super Grip Dirt Grabber Tires
Chassis Mounted Steering Servo
Dual Spring 80mm Scale Black Shocks
YOU WILL RECEIVE:
1x RC4WD Gelande II Truck Kit 1/10 Chassis Kit
This chassis kit requires building time of approximately 2-3 hours depending on your experience level
NOTES:
While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.
Spare Wheel and Tire not included
Fits RC4WD ARB Front Winch Bar Bumper for Gelande II D90/D110 (Z-S0853) and RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), but should work with RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168).
Required to Complete:
Truck Kit
Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)
Electronics:
Motor (35t, 45t, or 55t)
Electronic Speed Controller "ESC" (Z-E0007)
Radio and Receiver (2 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
1x Standard Size Servo (Z-E0035)
Battery (Consult your "ESC" manual) Z-E0090 or 2 cell Lipo battery
Charger (Consult your battery guide) Chargers
Possible Body Part Numbers:
Gelande II D90 Hard Plastic Body Kit (Z-B0008)
1/10 Gelande II D90 Limited Edition Pre-painted Green Body (Z-B0062)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov