Robart ROB690
$178.95

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Main Gear Landing Set 1/4 Scale Cub
Robart brand Robart Main Gear Assembly for 1/4 Scale Piper Cub Kits.
This Main Gear Assembly fits on the bottom of the fuselage.
FEATURES:
Fits the Hangar 9, Sig and any other 1/4 scale cubs with a fuselage
width of 6-1/2 (165mm), see COMMENTS below
Provides a more realistic scale appearance for your 1/4 scale Cub.
Pre-primed steel may be painted to modeler's preference.
May use existing wheels a with 3/16 axle diameter.
YOU WILL RECEIVE:
Two upper and two lower braces.
One right and left hand frame.
Two 3/16 axles.
Four clevis pins.
Four mounting brackets.
All mounting hardware.
Instructions and mounting template.
REQUIREMENTS:
Installing on plywood floor at bottom of fuselage for mounting.
COMMENTS
May require specific modifications to fit different brands of 1/4
scale cubs.
JXS 12/11/00
ir/jl
updt jxs 01/29/13
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This Main Gear Assembly fits on the bottom of the fuselage.
FEATURES:
Fits the Hangar 9, Sig and any other 1/4 scale cubs with a fuselage
width of 6-1/2 (165mm), see COMMENTS below
Provides a more realistic scale appearance for your 1/4 scale Cub.
Pre-primed steel may be painted to modeler's preference.
May use existing wheels a with 3/16 axle diameter.
YOU WILL RECEIVE:
Two upper and two lower braces.
One right and left hand frame.
Two 3/16 axles.
Four clevis pins.
Four mounting brackets.
All mounting hardware.
Instructions and mounting template.
REQUIREMENTS:
Installing on plywood floor at bottom of fuselage for mounting.
COMMENTS
May require specific modifications to fit different brands of 1/4
scale cubs.
JXS 12/11/00
ir/jl
updt jxs 01/29/13