Duratrax DTXP4110

This is an IntelliPeak AC/DC Mini Pulse Charger for Charging/Discharging Nickel Cadmium (NiCd) and Nickel Metal Hydride (NiMH) Battery Packs. Note: Do Not Charge -OR- Discharge Battery Cells smaller than Sub-C Size (Sub-C is one size smaller than a C-cell). Peak Charges NiCd batteries using specialized Peak Charging technology as well as NiMH batteries, plus Discharging and Cycling features not commonly found in other chargers. Incredibly small Peak Charger for optimum portability "Negative Delta V" Peak Detection for NiCds and NiMHs Built-in Artificial Intelligence to eliminate false Peaks Auto-identifies the quantity of cells being charged Computerized control, 8-bit 4MHz CPU with 8K ROM, 1K RAM, 1-channel 16-bit analog-to-digital converter. High efficiency P-Channel MOSFET drive transistors 11-15V DC input Incredibly small, detachable, 12V 7A AC Power Supply with built-in cooling fan for at-home use. Output: 4-7 cells on DC, 4-8 cells on AC Adjustable Fast Charge current of 1A-4.5A. (Note: 3A maximum Charge rate recommended with NiMH packs.) Pulsed Fast Charge, with 8-bit pulse width Modulated Current Control Output. 100mA TRICKLE charge 2A fixed Discharge rate. Fixed 2.6V Discharge Cutoff Voltage- (see COMMENTS). NOT designed for Discharging AA size (and smaller) cells (see COMMENTS). Cycle functions: Select a single Discharge/Charge cycle for periodic pack conditioning, or continuous "auto-repeat" cycles for reviving batteries that have developed a memory, or breaking in new packs. Four multi-function, high intensity LED indicators. Status light glows during Charge and flashes when nearing Peak. Audible mode select tone signals for easy set-up. One built-in miniature fan keeps the charger cool, increasing efficiency and lifespan. Reverse polarity and 7.5A fused overload protection Designed to Charge sub-C battery pack Five Year Warranty One IntelliPeak AC/DC Mini Pulse Charger One Prewired Standard Battery Connector One AC Power Supply One Instruction Sheet One DuraTrax Decal Sheet 11-15V DC OR 110V AC Battery Types: Nickel-Cadmium (NiCd) Nickel-Metal Hydride (NiMH) Charger Type: Pulsed Current, Peak Detecting Peak Detection Method: Negative Delta V AC Input Voltage: 110V (US Standard AC) DC Input Voltage: 11-15V Number of Cells: 4-7 cells DC or 4-8 cells with AC Power Supply NiCd Fast Charge: 1-4.5A NiMH Fast Charge: 1-3A (3A is the maximum recommended Charge rate) TRICKLE Charge Rate: 100mA Discharge Rate: 2A fixed Discharges down to a fixed voltage of 2.60V Width: 3.4" Height: 1.9" Depth: 3.5" Weight- Charger: 7.6oz (without Power Supply) Weight- Power Supply: 7.2oz Meter Display: NO Discharging cells smaller than sub-C size: Do NOT Discharge Cells Smaller than sub-C Size. This includes A and AA size (and smaller) cells which are normally installed inside radio transmitters and so on. The Discharge Current rate of the IntelliPeak is too high for such smaller cells and the wiring which is used to assemble such packs. Failing to avoid this will likely cause permanent damage to the cells and/or wiring in the battery packs, and possibly the equipment in which the battery is installed. Fixed discharge cutoff voltage- The IntelliPeak Charger has a fixed Discharge Cutoff Voltage setting of 2.6V. This Cutoff Voltage is not adjustable. If a specific Discharge cutoff value other than 2.6V is desired, monitor the pack voltage during Discharge with a separate voltmeter (or the built-in LCD on the IntelliPeak Digital Pulse Charger) and manually terminate Discharge at such point as desired. NiMH Battery Care and Handling: It is important not to allow NiMH packs to overheat while being charged. Heat can adversely affect the performance of NiMH batteries. If overheating is observed, disconnect the battery from the charger immediately and reduce the Charge rate for future charging needs. -Also, Do Not Deep-Cycle NiMH batteries. Permanent damage could result. Store NiMH packs with some voltage remaining in the cells. -Use a NiMH battery pack no more than three cycles per day, with a two to three hour break in-between for cooling. More frequent use will likely overheat the pack. WARNING: Do Not leave charger unattended during Fast Charge. If the battery or charger becomes hot at any time, disconnect the battery from the charger immediately. Other IntelliPeak Chargers Comparison- *All IntelliPeak Chargers-except DTXP4150 IntelliPeak Twin-Include: Ability to Charge NiCd and NiMH packs. Adjustable Pulsed Current. Cycling functions (single cycle: periodic conditioning of regularly used batteries, and Auto-Repeat cycle: for deep conditioning of new or unused batteries. Four multi-function LEDs and audible tones to ease setup. CPU driven. *Each one builds up to the next one: -Pulse Charger: AC/DC input, 1A Discharge rate, great for racers and sport modelers alike. -Mini Pulse Charger: Builds on the Pulse Charger's features with DC input, detachable AC Power Supply...charger itself is very small, great for portability, 2A Discharge rate, 1 built-in cooling fan. Note: This charger will only go down to a 1A Charge rate. (The others chargers go down to .5A). -Deluxe Pulse Charger: Adds to the Mini Pulse Charger's features with DC input, detachable AC power supply. 2 and 10A Discharge rate (faster Discharge ability). Negative Delta V (for NiCds) and Zero Delta V (for NiMHs) peak technologies, auto-selects. High rate charging for high-capacity NiMH packs. Two built-in cooling fans. -Digital Pulse Charger: Includes all of the Deluxe model's features plus LCD readout that shows Battery Voltage, Charge Current, and Discharge Capacity in milliamps. JAL 9/12/00 ir/jl updated12-10-01kh updt 8/09/05 &