Dromida DIDC0058

**Additional Technical Info Will Be Added When It Becomes Available. **
This is the brushless Electric Powered, Radio Controlled, 1/18 Scale
Ready to Run V.2 Monster Truck from Dromida.
Chassis: Plastic
Drive: Four wheel, shaft driven
Motor: 5300Kv brushless
Electronic Speed Control: Waterproof 25A
Radio: 2-channel 2.4GHz D100 system with trims and dual rates, and
waterproof steering servo, 3-channel receiver
Battery: 7.2V 1300mAh NiMh
Battery Charger: USB charger
Suspension: Fully adjustable independent
Shocks: Oil-filled (30 weight oil) big bore composite body, with
multiple mounting locations
Ball Bearings: Full set
Body: Painted and trimmed
Bumpers: Flexible plastic, black in color
Tires and Wheels: Rubber tires with offroad tread, gray plastic
wheels, width: 1.2" (29.5mm), outer diameter 2.5" (65mm), hex size
0.31" (8mm)
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Warranty: Ninety day limited through Hobby Services beginning at
date of purchase
RTR V.2 Monster Truck with 2.4GHz Radio, brushless Motor,
Painted Body, four AA Batteries, 7.2V Battery, USB Charger,
Instructions
Vehicle;
length: 10.6" (270mm)
width: 7.5" (190mm)
height: 4.3" (110mm)
Gear Ratio: 10.4:1
Body;
length: 9.8" (250mm)
width: 3.7" (95mm)
height: 2.5" (65mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x12mm Diff Assembly 1 DTXC1581
2 6x10mm Driveshaft 1 DTXC1561
1 8x12mm Driveshaft 1 DTXC1581
4 8x12mm Front Uprights 2 DTXC1581
4 8x12mm Rear Uprights 2 DTXC1581
jxs 02/22/17
&