RC4WD RC4Z-RTR0054

The crowd favorite TF2 RTR is back in black with the Midnight Edition RTR. Take on the trails in style with the blacked out details and the beefy Interco Narrow TSL SS 1.55 tires mounted on the gun-metal finish of the OEM 6-Lug Stamped Steel 1.55" Beadlock Wheels.
The TF2 RTR has both detailed styling and aggressive performance. You will find a balance of capability and performance built into every TF2 RTR. Performance of the TF2 RTR is smooth with its single speed transmission, 4WD drivetrain, bulletproof transfer case and quality metal components throughout. The TF2 RTR is truly a work of art in both appearance and performance.
Every TF2 RTR is compatible with a full range of options and performance parts designed to enhance the performance and add to the scale look of the only true scale 1/10 offroad truck. .. The TF2 RTR.
Your adventure awaits. .. .
Custom Designed for True-to-Scale Looks
Realistic Billet Aluminum Ladder Frame Chassis
R3 Single Speed Aluminum Transmission
Center Mounted Realistic 4x4 Transfer Case
Yota II Ultimate Scale Cast Axles
True to Scale Leaf Spring Suspension
Highly Detailed Body with Dropped Bed and More
OEM 6-Lug Stamped Steel 1.55" Beadlock Wheels (Plain)
RC4WD Interco Narrow TSL SS 1.55 Scale Tires
Realistic Tube Bumper - Rock Rails - Skid Plate
Hammer Transfer Case
Ratio: 1.47: 1
Gears: Wide .8 Mod Steel Gears
8 Bearings, Cast Casing, Hardened Gears
R3 Single Speed Transmission
Ratios
Pinion/Spur 14/64 = 4.57:1
Internal Ratio = 1.78:1
Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch,
Features - Metal Billet Aluminum Casing, Scale Looking, Motor Mount can be Rotated to 10 different Positions, Compatible with other Brand Spurs (Axial, TRA, Robinson)
Yota II Ultimate Scale Cast Axles
Ratio: 15/40 = 2.67:1
Width at Hex (Using 4mm TF2 Hexes): 178.2mm
Trail Finder 2 Chassis
Billet Aluminum Construction, Adjustable Shock Hoops
Drive Shafts
RC4WD Plastic Punisher Shaft (102mm - 117mm / 4.02" - 4.61") 5mm Hole
Wheels
Type: OEM 6-Lug Stamped Steel 1.55" Beadlock Wheels (Plain)
Hub: 12mm Hex
width: 21.5mm (0.85")
OD: 47.6mm (1.87")
Bumpers
Marlin Crawler Front Plastic Tube Bumper
Marlin Crawler Rear Plastic Tube Bumper
Marlin Crawler Side Plastic Sliders
Authentic crawler-style bumper, high quality flexible plastic, extremely durable and ultra scale
TF2 Truck Dimensions
Wheelbase: 287mm (11.3'')
width: 219mm (8.6'')
height: 219mm (8.6'')
Ground Clearance: 60mm (2.4'')
Final Drive Ratio: 31.93:1
Recommended Tools/Supplies:
Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Medium (Blue) Thread Lock
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)
Phillips Screwdrivers (small)
Grease and Lubrication (Z-S1199) (Z-S1197)
While some components may come assembled, we always recommend that you check the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to some of the hardware that is already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.