RC4WD RC4Z-E0118
$72.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Outcry Extreme Speed Controller Esc W/ Program Card
SPECIFICATIONS:
Input Voltage: 2-3S LiPo/5-9 Cells NiMh Built-in Powerful Switch-mode BEC
BEC Output Voltage-Current: 6V / 7.4V @ 8A
Cont. / Peak Current : 80A / 400A
Applicable to All Weather Conditions
Multiple Protection Functions: Low Voltage Protection, Over-temperature Protection
Recommended Motors: 540 /550 / 775 Motors
Size: 1.96 x 1.68 x 1.04in / 50 x 42.9 x 26.5mm
Program Card Working Voltage: 5.0V - 8.0V
Program Card Size: 1.53 x 0.47 x 22.0in / 38.9 x 12.0 x 55.9mm
Total Weight: 1.37oz / 110.5g
Battery Plug: XT60
YOU WILL RECEIVE:
1x Outcry Extreme Speed Controller ESC 1x LED Program Card
1x XT60 Female to Tamiya Male Connector Adapter
1x Extension Wire 150mm
NOTES:
Prior to proceeding, be sure to either remove the pinion from the motor or elevate the truck so the wheels are not able to touch the ground. Do not touch this product while in use to avoid injury. Product emits heat and thus, the heat sink may become extremely hot.
This product is water-resistant.
Begin using your ESC by calibrating with your transmitter. We strongly recommend all users to use the Fail Safe function on the radio system and set (F/S) to Output OFF or Neutral Position . Example of calibrating Neutral range and Endpoint.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov