RC4WD RC4Z-E0058
$37.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Rc4wd 1:10 High Performance Smd Led Light Bar (75mm/3)
This is a all new High Performance Lightbar for any RC. Will make any project look better and add much needed lighting.
Cast Molded Housing
Reversible "L" brackets to fit many applications
Adjustable "L" brackets for rotating light
16 Individual LED bulbs
Super Bright Lighting
Vented on side to dissipate heat
Works with up to 11.1v lipo with use of a BEC to regulate voltage below 7.4 volts
Standard Receiver Plug
Connects to extra channel on receiver
2mm Mounting Holes
Rated Output 32 Lumens
Overall length: 3.7in / 95mm
Light Bar width: 3.1in / 7.88mm
Overall height: 0.81in / 20.8mm
Light Bar height: 0.63in / 16.2mm
Weight: 1.09oz / 31g
Use medium grade threadlock on "L"bracket nut to prevent loss and to keep the light in position.
Mounting hardware can be found here. M2 SHCS / M2 BHSC
While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver.
SPECIFICATIONS:
Cast Molded Housing
Reversible "L" brackets to fit many applications
Adjustable "L" brackets for rotating light
16 Individual LED bulbs
Super Bright Lighting
Vented on side to dissipate heat
Works with up to 11.1v lipo with use of a BEC to regulate voltage below 7.4 volts
Standard Receiver Plug
Connects to extra channel on receiver
2mm Mounting Holes
Rated Output 32 Lumens
Overall length: 3.7in / 95mm
Light Bar width: 3.1in / 7.88mm
Overall height: 0.81in / 20.8mm
Light Bar height: 0.63in / 16.2mm
Weight: 1.09oz / 31g
NOTES:
Use medium grade threadlock on "L"bracket nut to prevent loss and to keep the light in position.
Mounting hardware can be found here. M2 SHCS / M2 BHSC
While the lightbar comes with a standard receiver plug, this is only for ease of use. The receiver will not allow enough power for the lightbar and it will be dim. If you want the light to be bright, you will need to power it directly from your battery, or use a BEC to get more power to your receiver.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov