Novak NOV1842
$106.79
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued Rooster Crawler/55t Motor Combo
This is the Novak Rooster Crawler Reversible Electronic Speed Control
and the #3555 Fifty Five Turn Crawler Brushed Motor.
ESC Features-
Two specific crawling driver profiles that feature zero reverse delay
and high-powered drag brakes (or "hill or "hold" brakes)
Built-in LiPo cut-off protection prevents batteries from going below
the critical safety voltage level
User replaceable input harness
Heavy duty 6V/5A BEC
Radio priority and polar drive circuitry
High-efficiency heat sink
Power output for optional 6V fan (available separately, NOVC5648)
Water resistant case
Thermal overload protection
Crawler Motor Features-
Designed for vehicles requiring precise movement control
High number of turns for excellent torque and long-run times
Dual-ball bearing for smoothness and efficiency
100 percent rebuildable with user-replaceable brushes and springs
Direct-Solder Wiring Tabs for flexible soldering options
Three factory-installed motor capacitors to reduce glitching
Novak Rooster Crawler Electronic Speed Control with instructions,
connectors, use-replaceable input harness and double-sided tape
Novak Fifty Five Crawler Brushed Motor
Installing in vehicle and connecting motor and battery
ESC
Input Voltage: 4-7 NiCd/NiMH cells (1.2V per cell) or 2 LiPo cells
Size: 1.54" x 1.18" (39 x 30mm)
Weight: 2.66oz (75.5g) w/wires; 1.57oz (44.5g) w/o wires
On-Resistance: 0.0014 ohms (forward); 0.0028 ohms (reverse)*
Rated Current: 400A* (forward)
Braking Current: 200A*
BEC: 6.0V/5.0A
Motor Limit 27-turn Brushed (at 6 cells NiMH)
Discrete Steps: 256 Forward; 256 Reverse
Battery Plug: Tamiya type
Drive Profiles: 2
Status LEDs: 2
Voltage Cut-off: 6.25V (LiPo Profiles)
*MOSFET rating at 25°C junction temperature
Fifty Five Crawler Brushed Motor
Number of Turns: 55
Design: Stand-up Brushed
Input Voltage: 4-7 cells (1.2V/cell) or 2S Li-Poly cells
Motor Size: 2.07 x 1.42" (52.7 x 36.1mm)
Shaft Diameter: 0.125" (3.2 mm) [accepts all existing pinion gears]
Bearing: Standard 3/8" x 1/8"
Weight: 6.03 oz. (171g)
Magnet: High-Strengh Ferrite
Rooster ESC available separately, NOVM1841
55T Crawler Motor available separately, NOVC3555
jxs 12/05/07
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov