Duratrax DTXP4236

$89.99
Duratrax logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
alternate part numbers:
Onyx 235 AC/DC Advanced Charger w/Balancing LCD
Duratrax DTXP4236 - Onyx 235 AC/DC Advanced Charger w/Balancing LCD
This is the DuraTrax Onyx 235 AC/DC Advanced Charger with Built-In Balancer. Combines the proven features of the Onyx 230 with balancing and other asked for extras.
Also charges LiPo, Li-Ion, and LiFe packs.

When charging LiPo batteries, the Main Charge Lead and the Balance Lead MUST be connected in order for the charger to operate. If only one connection is made, the charger will sound an alarm when charging is initiated.

FEATURES:
Charges 1-10 cell NiCd or NiMH (1.2 - 12V) cells and 1-4 cell LiPo Li-Ion or LiFe (3.7 - 14.8V) cells
Balancing jack for up to 4 lithium cells
Universal jack for charging radio batteries
Detachable AC and DC input power cords
USB jack for charging music players, cell phones and other accessories
Mini USB jack for downloading firmware
Custom CC/CV charge algorithm carfully charges Lithium Polymer, Lithium-Ion or Lithium Ferrite-Phosphate (A123) batteries fully and safely
Pushbutton controls and audible tones for easy setup and control
Precise peak detection with automatic TRICKLE charge fills packs completely for optimum voltage and run time, 3 - 20mV adjustable peak detection helps to customize charger-to-battery performance
Built-in banana jacks allow connection with many common charge adapters, an adapter with Kyosho type plug is included
Built-in fan for long lasting performance
Custom reversed LCD with backlight for easy viewing in any condition shows input and output voltges, peak voltage, charge current, charge capacity and time and more
Small lightweight switching AC power supply delivers up to 5 amps of charge current
Solid state reverse polarity and current overload safety devices
FIVE YEAR warranty through Hobby Services (U.S.A. and Canada only) beginning at date of purchase

YOU WILL RECEIVE:
DuraTrax Onyx 235 AC/DC Advanced Charger with Built-in Balancer and output adapters for Star Plug and standard connectors, lithium balance adapters for ElectriFly and FlightPower/Thunder Power

REQUIREMENTS:
Charge Leads depending on type of battery

SPECIFICATIONS:
AC Input: 110V AC 60Hz - 240V 50Hz, detachable cord, 50W
DC Input: 11-15V detachable cord with alligator clips
Battery Types: 1-10 NiCd or NiMH cells (1.2-12V) 1-4 cell LiPo, LiIon or LiFe (3.7-14.8V)
Fast Charge Current: 0.1 - 8.0A linear (4C limit for Lithiums, 5A limit with AC input
Fast Charge Termination: Peak detection for NiCd/MH, CC/CV for Lithium
Fast Charge Safety Timer: OFF-300 minutes
NiCd/NiMH Peak Sensitivity: 3 - 20mV adjustable
NiCd/NiMH Auto Trickle Current: Auto (1/20 fast charge settings) or manual(0 - 250mA)
Battery Memories: 10
Protective Devices: Solid-state reverse polarity and current overload
Case size: 6.3 x 5.3 x 1.7" (160 x 134 x 43mm)
Weight: 19.7oz (559g) with DC cord attached
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov