Duratrax DTXP4220

This is the DuraTrax Onyx 220 AC/DC Peak Charger with Backlit LCD.
**Attention International Customers-**
**The AC input voltage of this charger is 110V. **
**220 refers only to the model number. **
With adjustable charge current ranging from 0.1 to 5 amps,
the Onyx 220 is an excellent choice for applications as
small as 1/32 scale electrics to 1/8 scale electrics.
The 4-8 cell output range also makes this charger ideal for
nitro receiver packs and transmitter packs.
Charges 4-8 cell NiCd or NiMh 4.8 - 9.6V cells with a capacity range
of 50 - 9900mAh
Pushbutton controls and audible tones for easy setup and control
Five battery memories are included for quick changes between battery
types
Fully adjustable charge currents and NiCd and NiMh flexibility for a
wide range of applications
Precise peak detection with automatic TRICKLE charge fills packs
completely for optimum voltage and run time, 3 - 20mV adjustable
peak detection helps to customize charger-to-battery performance
Built-in jack included for charging 4 or 5 cell NiCd or NiMh
receiver batteries for nitro models, even 8-cell transmitter
packs
Custom reversed LCD with backlight for easy viewing in any condition
shows input and output voltges, peak voltage, charge current,
charge capacity and time and more
Small, light weight switching AC power supply delivers up to 5 amps
of charge current
Solid state reverse polarity and current overload safety devices
FIVE YEAR warranty (U. S. A. and Canada only)
DuraTrax Onyx 220 AC/DC Sport Peak Charger
AC Input: 110V AC 60Hz
DC Input: 11-15V DC, built-in lead with alligator clips
Battery Types: 4-8 NiCd or NiMh cells (4.8-9.6V)
Battery Capacity Range: 50-9900mAh
Fast Charge Current: 0.1A, 5.0A linear adjustable (40W max. )
Fast Charge Termination: Peak detection
Fast Charge Safety Timer: OFF-300 minutes
Peak Sensitivity: 3 - 20mV adjustable
TRICKLE Charge Current: Automatic 1/20 fast charge setting or manual
adjust (0-250mA)
Controls: 4 pushbuttons
Battery Memories: 5
Display Type: 2x8 reversed LCD with backlight
Audible Indicators: Start, stop, errors
Output Connections: Built-in lead with Kyosho type connector
Built-in jack for charging 4 or 5 cell Rx packs
*Standard to Deans Ultra Male Adapter available
separately (GPMM3131)
*Standard to Vendetta, MiniQuake, RS4 Battery
available separately (DTXC2210)
Protective Devices: Solid-state reverse polarity and current overload
Case size: 5.7 x 5.1 x 1.8" (145 x 130 x 45mm)
Weight: 20.4oz (578g)
For batteries using a TRA type connector, order the TRAC3061
adapter.
The manual mentions a cooling fan but this model DOES NOT have a
cooling fan.
jxs 1/29/08
ir/jxs
updt jxs 05/24/11
&