Futaba FUTK6110
$199.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.6K V2 Heli 2.4GHz R3006SB TFHSS/SFHSS
Futaba brand Futaba 2.4GHz 6K Helicopter Radio System
with the R3006SB T-FHSS SBUS, SBUS2 Receiver.
Servos and Sensors Not Included.
This is the helicopter version which will default to heli settings
when powered up and does not have a ratcheted throttle stick.
FEATURES:
Telemetry system (T-FHSS) provides data on receiver battery
voltage, external voltage, temperature, RPM, altitude and
variometer (sensors not included and must be purchased separately,
see COMMENTS below)
S.Bus/S.Bus2 servo setting functions programmable through transmitter
R3006SB receiver can use SBus as the main link/communication to
servos, or a combination of SBus and conventional outputs together
Programmable mixing for airplanes, helicopters, gliders and multi-
rotors
Four assignable switches, three 3-position and one 2-position
Switch/VR position change and AUX channel function change
Updateable software through the Futaba CIU-2 USB PC Interface
not included, order (FUTM0951)
Programmable mixing (3-Normal, 1-Curve)
Wing Type (5-Wing, 2-Tail)
Throttle Cut V-Tail
Dual Rate/Expo Camber
Throttle Curve Air Brake
Idle Down Gyro
Aileron Differential Elevon Mixing
Elevator to Flap/Flap to Elevator Mixing
Transmitter also compatible with S-FHSS receivers
30 model memory, model naming up to 8 characters
Auxiliary channel
Parameter functions
Servo monitor/test
Throttle position warning
Wireless model data transfer
Timer-system & model (Up/Down)
Trainer system
Fail safe
End points
One year limited warranty through the Futaba Service Center
beginning at date of purchase
YOU WILL RECEIVE:
Futaba 2.4GHz 6K Helicopter Transmitter
R3006SB Receiver, FUTL7683
Switch Harness
REQUIREMENTS:
AA Batteries: Four for transmitter
Servos and sensors of modeler's choice
SPECIFICATIONS:
Transmitter;
Transmitting Frequency: 2.4GHz band
System: T-FHSS Air, S-FHSS switchable
Power Supply: Four AA batteries
Receiver;
Power Requirement: 4.8V~7.4V battery or regulated output from ESC
Size: 1.7 x 0.98 x 0.35 (43.1 x 25.0 x 8.8 mm)
Weight: 0.3 oz. (8.5g)
Battery: F/S Voltage
COMMENTS
The following Futaba sensors are available;
SBS-01T Temp Sensor, FUTM0854
SBS-01TE EP Temp Sensor, FUTM0856
SBS-01A Altitude Sensor, FUTM0851
SBS-01RM Magnet Type RPM Sensor, FUTM0852
SBS-01RO Optic RPM Sensor, FUTM0853
SBS-01RB Brushless Motor RPM Sensor, FUTM0857
jxs 08/31/15
ir/jxs
with the R3006SB T-FHSS SBUS, SBUS2 Receiver.
Servos and Sensors Not Included.
This is the helicopter version which will default to heli settings
when powered up and does not have a ratcheted throttle stick.
FEATURES:
Telemetry system (T-FHSS) provides data on receiver battery
voltage, external voltage, temperature, RPM, altitude and
variometer (sensors not included and must be purchased separately,
see COMMENTS below)
S.Bus/S.Bus2 servo setting functions programmable through transmitter
R3006SB receiver can use SBus as the main link/communication to
servos, or a combination of SBus and conventional outputs together
Programmable mixing for airplanes, helicopters, gliders and multi-
rotors
Four assignable switches, three 3-position and one 2-position
Switch/VR position change and AUX channel function change
Updateable software through the Futaba CIU-2 USB PC Interface
not included, order (FUTM0951)
Programmable mixing (3-Normal, 1-Curve)
Wing Type (5-Wing, 2-Tail)
Throttle Cut V-Tail
Dual Rate/Expo Camber
Throttle Curve Air Brake
Idle Down Gyro
Aileron Differential Elevon Mixing
Elevator to Flap/Flap to Elevator Mixing
Transmitter also compatible with S-FHSS receivers
30 model memory, model naming up to 8 characters
Auxiliary channel
Parameter functions
Servo monitor/test
Throttle position warning
Wireless model data transfer
Timer-system & model (Up/Down)
Trainer system
Fail safe
End points
One year limited warranty through the Futaba Service Center
beginning at date of purchase
YOU WILL RECEIVE:
Futaba 2.4GHz 6K Helicopter Transmitter
R3006SB Receiver, FUTL7683
Switch Harness
REQUIREMENTS:
AA Batteries: Four for transmitter
Servos and sensors of modeler's choice
SPECIFICATIONS:
Transmitter;
Transmitting Frequency: 2.4GHz band
System: T-FHSS Air, S-FHSS switchable
Power Supply: Four AA batteries
Receiver;
Power Requirement: 4.8V~7.4V battery or regulated output from ESC
Size: 1.7 x 0.98 x 0.35 (43.1 x 25.0 x 8.8 mm)
Weight: 0.3 oz. (8.5g)
Battery: F/S Voltage
COMMENTS
The following Futaba sensors are available;
SBS-01T Temp Sensor, FUTM0854
SBS-01TE EP Temp Sensor, FUTM0856
SBS-01A Altitude Sensor, FUTM0851
SBS-01RM Magnet Type RPM Sensor, FUTM0852
SBS-01RO Optic RPM Sensor, FUTM0853
SBS-01RB Brushless Motor RPM Sensor, FUTM0857
jxs 08/31/15
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov