Tamiya TAM58502
$214.90
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Blitzer Beetle 2011 2WD Off Road Kit
This is the electric powered, radio controlled, 1/10 scale, Tamiya Blitzer Beetle 2011 Off-Road Kit.
Chassis: ABS plastic bathtub type
Drive: Rear wheel
Motor: 540 size
Pinion Gear: 13T metal
Electronic Speed Control: Tamiya TEU-104BK with reverse
Differential: Planetary gear
Gearbox: Sealed
Shocks: Oil filled CVA, plastic body
Suspension: Double wishbone
Body: Resin molded, black in color with tinted windows
Steering: Two-piece adjustable steering tie rods with servo saver
Tires: Front rib/spike 1.7" (42.2mm) wide, 3.8" (98mm) diameter
Rear spike/X pattern 2" (52mm) wide, 3.8" (98mm) diameter
Wheels: Neon orange plastic 10 spoke
Front 1.6" (41.5mm) wide, 2.2" (56mm) diameter
Rear 1.9" (50mm) wide, 2.2" (56mm) diameter, 12mm hex
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable
540 Motor, Driver Figure, Servo Saver, Decals and Instruction
Manual
Radio: 2-channel with steering servo
Battery: 6-cell, 7.2V NiMh stick pack with standard connector
Battery Charger: To match selected battery
Transmitter Batteries: Four or eight depending on transmitter
Tools and track equipment
Vehicle;
length: 15.5" (394mm)
width: 11.6" (295mm)
height: 7.2" (182mm)
Body;
length: 13.1" (332mm)
width: 7.3" (186mm)
height: 4.9" (124mm)
To upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x11mm Gearbox 2 DTXC1547
4 5x11mm Rear Wheels 2 DTXC1547
4 5x11mm Front Wheels 2 DTXC1547
To paint body to match photos on box, order the following Tamiya
colors;
TS-14 Black, TAMR5014 X-18 Semi Gloss Black, TAMR1518
X-2 White, TAMR1502 XF-1 Flat Black, TAMR1701
X-3 Royal Blue, TAMR1503 XF-2 Flat White, TAMR1702
X-6 Orange, TAMR1506 XF-7 Flat Red, TAMR1707
X-7 Red, TAMR1507 XF-15 Flat Flesh, TAMR1715
XF-16 Flat Aluminum TAMR1716
jxs 10/06/11
ir/jxs
&
FEATURES:
Drive: Rear wheel
Motor: 540 size
Pinion Gear: 13T metal
Electronic Speed Control: Tamiya TEU-104BK with reverse
Differential: Planetary gear
Gearbox: Sealed
Shocks: Oil filled CVA, plastic body
Suspension: Double wishbone
Body: Resin molded, black in color with tinted windows
Steering: Two-piece adjustable steering tie rods with servo saver
Tires: Front rib/spike 1.7" (42.2mm) wide, 3.8" (98mm) diameter
Rear spike/X pattern 2" (52mm) wide, 3.8" (98mm) diameter
Wheels: Neon orange plastic 10 spoke
Front 1.6" (41.5mm) wide, 2.2" (56mm) diameter
Rear 1.9" (50mm) wide, 2.2" (56mm) diameter, 12mm hex
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable
YOU WILL RECEIVE:
1/10 scale Tamiya Blitzer Beetle 2011 kit with Body and Wheels, ESC 540 Motor, Driver Figure, Servo Saver, Decals and Instruction
Manual
REQUIREMENTS:
Battery: 6-cell, 7.2V NiMh stick pack with standard connector
Battery Charger: To match selected battery
Transmitter Batteries: Four or eight depending on transmitter
Tools and track equipment
SPECIFICATIONS:
length: 15.5" (394mm)
width: 11.6" (295mm)
height: 7.2" (182mm)
Body;
length: 13.1" (332mm)
width: 7.3" (186mm)
height: 4.9" (124mm)
COMMENTS:
Qty. Size Location Qty. Bearing Set
4 5x11mm Gearbox 2 DTXC1547
4 5x11mm Rear Wheels 2 DTXC1547
4 5x11mm Front Wheels 2 DTXC1547
To paint body to match photos on box, order the following Tamiya
colors;
TS-14 Black, TAMR5014 X-18 Semi Gloss Black, TAMR1518
X-2 White, TAMR1502 XF-1 Flat Black, TAMR1701
X-3 Royal Blue, TAMR1503 XF-2 Flat White, TAMR1702
X-6 Orange, TAMR1506 XF-7 Flat Red, TAMR1707
X-7 Red, TAMR1507 XF-15 Flat Flesh, TAMR1715
XF-16 Flat Aluminum TAMR1716
jxs 10/06/11
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov