Tamiya TAM58464

This is the 1/10 scale, radio controlled, electric powered, Suzuki Swift Super 1600 On-Road Race Car Kit from Tamiya. Chassis: M-05Ra plastic Drive: Front wheel Motor: 540 size brushed Pinion Gear: 16 tooth metal Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541 Body: Clear polycarbonate with skid plate and inner guards to protect the motor and battery from dirt, mirrors and rear wing separately molded in yellow ABS plastic Shocks: Plastic body, friction Tires: 60D rally block, 0.94" (24mm) wide, 2.2" (56mm) diameter Wheels: 11 spoke, white in color 0.94" (24mm) wide, 1.5" (38mm) diameter Differential: Planetary gear Steering: Three link with servo saver Suspension: Double wishbone with different positons for shock and upper arms for a wide range of suspension settings Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Suzuki Swift Super 1600 On-Road Race Car Kit with clear body, rear wing, mirrors, tires, wheels, ESC, instruction manual, all body trim and sponsor decals Radio: 2-channel with standard size steering servo AA Batteries: 8 for transmitter Battery: 6-cell stick with standard connector Building and track equipment Vehicle- Length: 13.7" (347mm) Width: 6.6" (168mm) Height: 5.4" (138mm) Wheelbase: 8.3" (210mm), 8.8" (225mm), 9.4" (239mm) Body- Length: 13.5" (343mm) Width: 6.6" (168mm) Height: 4.7" (120mm) To replace or upgrade to Ball Bearings, use: Qty. Size Location Qty. Bearing Set 2 5x11mm Gearbox 1 DTXC1547 2 5x8mm Gearbox 1 DTXC1523 1 5x11mm Diff Gear 1 DTXC1547 2 5x11mm Front Axle 1 DTXC1547 4 5x8mm Steering Linkage 2 DTXC1523 2 5x11mm Rear Axle 1 DTXC1547 jxs 08/02/10 ir/jxs &