Tamiya TAM58418
$211.20
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.The Boomerang 4WD Off Road Re-issue 2008
This is the electric powered, radio controlled, 1/10 scale Tamiya Boomerang Buggy kit.
Chassis: ABS resin bathtub type
Drive: Four wheel shaft
Motor: 540 size
Electronic Speed Control: TEU-101BK Forward and Reverse ESC
Shocks: Three plastic bodied, oil filled
Gearbox: Enclosed
Bumper: Front blade type
Body: Clear polycarbonate
Wheels: Nylon resin 5 hole design, white in color
Tires: Front Semi Pneumatic Super Gripper Tires: outer diameter:
3.5 inch (88.5mm), inner diameter: 2 inch (50mm), width: 1 inch (25.4mm)
Rear Semi Pneumatic Super Gripper Tires: outer diameter: 3.5 inch
(90mm), inner diameter: 2 inch (52.6mm), width: 1.5 inch (37mm)
Steering: Bell crank type with servo saver
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of
the front suspension when viewed from the side of the car in
relation to the chassis
instruction manual, decal sheet
Radio: 2-ch with one standard servo
Radio Batteries: 8 AA
Battery: 6-cell stick pack
Battery Charger: Timed or peak for 6-cell battery
Polycarbonate safe paint and building and track equipment
CHASSIS-
length: 245mm (9.6 inch)
width: 93mm (3.7 inch)
height: 76mm (3 inch)
BODY-
length: 10 inch (254mm)
width: 5.25 inch (133mm)
height: 2.75 inch (70mm)
For Replacement Ball Bearings or to Upgrade From Bushings use:
Qty. Size Location Qty. Bearing Set
3 5x11mm Rear Gearbox 2 DTXC1547
1 5x8mm Rear Gearbox 1 DTXC1523
2 5x11mm Front Gear Assembly 1 DTXC1547
2 5x8mm Front Gear Assembly 1 DTXC1523
4 5x11mm Front Hubs 2 DTXC1547
4 5x11mm Rear Hubs 2 DTXC1547
cnh 1/12/09
ir/jxs
&
description revised by: DB July 8, 2017
FEATURES:
Drive: Four wheel shaft
Motor: 540 size
Electronic Speed Control: TEU-101BK Forward and Reverse ESC
Shocks: Three plastic bodied, oil filled
Gearbox: Enclosed
Bumper: Front blade type
Body: Clear polycarbonate
Wheels: Nylon resin 5 hole design, white in color
Tires: Front Semi Pneumatic Super Gripper Tires: outer diameter:
3.5 inch (88.5mm), inner diameter: 2 inch (50mm), width: 1 inch (25.4mm)
Rear Semi Pneumatic Super Gripper Tires: outer diameter: 3.5 inch
(90mm), inner diameter: 2 inch (52.6mm), width: 1.5 inch (37mm)
Steering: Bell crank type with servo saver
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of
the front suspension when viewed from the side of the car in
relation to the chassis
YOU WILL RECEIVE:
1/10 scale Tamiya Boomerang Buggy kit with body, 540 motor, ESC instruction manual, decal sheet
REQUIREMENTS:
Radio Batteries: 8 AA
Battery: 6-cell stick pack
Battery Charger: Timed or peak for 6-cell battery
Polycarbonate safe paint and building and track equipment
SPECIFICATIONS:
length: 245mm (9.6 inch)
width: 93mm (3.7 inch)
height: 76mm (3 inch)
BODY-
length: 10 inch (254mm)
width: 5.25 inch (133mm)
height: 2.75 inch (70mm)
COMMENTS:
Qty. Size Location Qty. Bearing Set
3 5x11mm Rear Gearbox 2 DTXC1547
1 5x8mm Rear Gearbox 1 DTXC1523
2 5x11mm Front Gear Assembly 1 DTXC1547
2 5x8mm Front Gear Assembly 1 DTXC1523
4 5x11mm Front Hubs 2 DTXC1547
4 5x11mm Rear Hubs 2 DTXC1547
cnh 1/12/09
ir/jxs
&
description revised by: DB July 8, 2017
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov