Tamiya Tam58388

This is the 1/10 scale electric powered, radio controlled, Tamiya Drift Spec Mazda RX-7 On_road Car Kit. Chassis: Plastic tub TT-01 design Drive: Four wheel shaft drive Motor: Sport tuned 540 size with pre-attached leads and aluminum heat sink Electronic Speed Control: Tamiya TEU-101BK, TAMM3194 with reverse Lights: LED head and tail lights turn on automatically when car is switched on, the Tamiya #53937 Light Control Unit (TAMC1477) can be added for more control Ball Bearings: Full set Shocks: CVA mini drift spec with short springs Gearbox: Sealed front and rear Differentials: Bevel gear Transmission: Single speed Tires: Drift type 1.25" x 2.52" (32 x 64mm) Wheels: Black 5-spoke Body: Clear Mazda RX-7, requires trimming and painting Bumpers: Foam front bumper Suspension: Double wishbone, fixed non-adjustable Camber Tie Rods: Fixed non-adjustable Steering Tie Rods: Adjustable, caster/toe-in is the angle at which tires point inward as viewed from above Steering: Bell-crank type Servo Saver: Included Tamiya Mazda RX-7 Drift Car kit, drift spec shocks, 540 motor, Electronic Speed Control, clear body, tires, foam bumper, wheels, 19 tooth pinion gear, 61 tooth spur gear, instructions Radio: 2-channel with one steering servo Battery: 6 flat pack with standard connector Charger: AC/DC Timed or Peak for 6-cell battery VEHICLE- Length: 17.4" (444mm) Width: 7.4" (187mm) Height: 5.2" (132mm) Weight: 3.1lbs (1400g) BODY- Length: 18" (457mm) Width: 8" (203mm) Height: 5" (127mm) For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. 12 5x11mm front & rear diff gears, hubs (use 6-DTXC1547) 4 8X12mm front & rear diff gears (use 2-DTXC1597) jxs 5/24/07 tlw 7/17/07 ir/jxs &