HPI HPI15180

This is the HPI Nitro Star T-15L Glow Engine with Pullstarter. Fits any glow powered car or truck that accepts small block (.12-.15) size engines with pull starters ABC piston and liner construction "A"luminum piston with a "B"rass cylinder liner that is "C"hrome plated 5.5mm rotary carburetor HPI R4 medium cold glow plug Standard crankshaft Side exhaust Compatible with the HPI Roto Start 2 Electric Starter System, HPIP7132 Two year limited warranty through HPI beginning at date of purchase HPI Nitro Star T-15L Engine with Pullstarter, Air Filter with Two Elements, R4 Glow Plug, Rotary Carburetor and instruction Manual Fuel: Car blend glow fuel with 20-25% nitro content Glow starter and track equipment Displacement: 0.15 cu in (2.49cc) Bore and Stroke: 15.0 x 13.6mm Maximum Power: 1.2hp/29,000 RPM Height from Crankcase Bottom/top of Cylinder Head: 3.9" (98.7mm) Distance/Mounting Tab to Exhaust Mounting Hole Center: 1.4" (36.2mm) Distance/Starter to Front Bearing: 2.7" (70.1mm) Mounting Hole Centers Opposite Side: 1.2" (31mm) Mounting Hole Centers Same Side: 0.43" (11mm) Width at Mounting Tabs: 1.6" (40mm) Front Mounting Hole Center to Front Bearing: 1.2" (29.5mm) Center of Carburetor to Center of Crankshaft: 0.97" (24.7mm) Cylinder Head Diameter: 1.9" (49mm) Crankshaft Size: UNF 1/4-28 Carburetor Settings: **High and low speed needles are factory set and not recommended to** **be changed** High Speed Needle: Flush with carb body Low Speed Needle: Flush with carb body, turn needle in 1/8 turn increments to adjust-no more than two turns from flush Idle Adjustment Screw: Set so that clutch does not engage, turn counter clockwise to reduce idle speed, clockwise to increase it jxs 09/29/10 ir/jxs &