HPI HPI10703

This is the 1/10 scale electric powered, radio controlled, ready to run HPI E10 on-road T0Y0TA Sprinter Trueno Drift Car. Chassis: Bathtub type 0.078" (2mm) thick with quick change battery holder and adjustable motor and radio equipment positions to easily convert from street/touring to drift driving with no extra parts to buy Drive: Four wheel shaft Radio: HPI TF-1 AM pistol grip radio system with RF-1 receiver, SF- 1 steering servo Electronic Speed Control: EN-1 with reverse Motor HPI Saturn 27T 540 size, HPIC1144 Charger: AC wall type Battery: 7.2V Shocks: Composite bodied Gearboxes: Closed Differentials: Front and rear bevel-type Transmission: Single-speed Tires: T-Drift 2.48"(63mm) diameter, 1.02" (26mm) wide Wheels: Six spoke, chrome Gram Lights 57S-Pro 2.08" (53mm) diameter, 1.02" (26mm) wide Bumpers: Front, foam Body: Pre-painted T0Y0TA Sprinter Trueno, adjustable body mounts to accomodate a large variety of touring car bodies Suspension: Full-time independent Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bell-crank type with servo saver HPI E10 on-road T0Y0TA Sprinter Trueno Drift Car with painted body, radio, ESC, battery, charger, wheels, tires, 27T motor and manual _ Radio Batteries: (8) AA size Misc. Items: Building and track equipment VEHICLE- Length: 14.8" (375mm) Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm) Height: 4.25" (107.95mm) Weight: 2.8 lbs (1270g) without body Wheelbase: 10" (255mm) Drive Ratio: 7.48:1 Tread: Front and rear-6.25" (158.75mm)(side-to-side at wheel centers) Front Track: 7.25" (184.15mm) Rear Track: 7.25" (184.15mm) Spur Gear: 65T Tires- Front and rear: 2.48" x 1.02" (63x26mm) BODY- Length: 17.25" (438.15mm) Width: 7.75" (196.85mm) at rear wheels (widest point) 7.5" (190.5mm) behind from wheels (thinnest point) Height: 4.75" (107.95mm) For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. 2 12x18x14 Center drive shaft DTXC1597 1 Body pictured on the box is painted red For the assembled version without battery or radio, order HPIC2761. jxs 10/02/07 tlw 10/04/07 ir/jxs &