HPI HPI10445

This is the 1/10 scale glow powered, radio controlled,
HPI Nitro RS4 MT 2 18SS+ off-road Truck kit.
Upgrades over the Nitro RS4 MT 2 18SS include
Aluminum Tuned Pipe Machined Steel Diff Gears
S Compound Ground Assault Tires Two Stage Air Filter
Revised Gear Ratio and more. . .
Chassis: 0.10" (2.5mm) aluminum anodized gray in color
Drive: Four wheel shaft driven
Engine: HPI .18 cu in (2.9cc) 1.5hp pull start, with dual needle
carburetor, large heat sink head and lightweight connecting rod
can also be bump started for racing applications, two stage air
filter
Engine Mounts: Machined aluminum, anodized blue in color
Exhaust: Dual chamber aluminum tuned pipe with high-flow tube
header
Fuel Tank: Low profile 3.4oz (100cc) with built-in ceramic fuel
filter
Clutch: Savage style, 2 shoe
Transmission: Single speed
Ball Bearings: Full set of sealed bearings with purple seals
Shocks: 4 plastic bodied oil-filled, with coil-over stiff springs
long stroke design
Main Gear: 49 tooth, composite nylon construction
Gearboxes: Sealed front and rear
Differentials: Bevel gear style with machined steel gears
Brakes: Single disc brake set-up
Tires: Dirt Bonz Jr. with foam inserts
Wheels: Black Scortch high impact nylon
Radio Tray: Sealed, removable for cleaning
Body: Pre-trimmed clear
Universal Joints: Captured design eliminates set screw found on most
dogbones, easily rebuildable
Bumpers: Angled nylon skid plate on front
Suspension: 4-wheel independent with adjustable steel turnbuckles
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank style
Servo Saver: Included
HPI Nitro MT2 18SS+ off road truck with oil filled shocks, trimmed
clear body, tires, foam inserts, black 10-spoke 2.2" (56mm) wheels,
tooth clutch bell,
tooth spur gear, instructions
Radio: 2-Channel with 2 Servos, high torque steering servo
recommended but not required
Radio Batteries: (8) AA size
Glow Starter: 1.2V
Paint: Polycarbonate for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-stroke glow fuel with 10%-15% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
Vehicle-
length: 17.4" (443mm)
width: 12.5" (317mm)
height: 6.5" (165mm)
Weight: 4.96lbs (2250g) approx.
Wheelbase: 11.75" (298mm) wheels on-center front-to-rear
Tread-Front: 10.25" (260mm)
Rear: 10.75" (273mm) wheels on-center side-to-side
Front Track: 12.5" (317mm)
Rear Track: 12.5" (317mm) wheels at outer edges
Ground Clearance: 1.5" (38mm)
Tires- 2.2" (56mm) ID x 4.05" (103mm) OD 1.98" (50mm) W
Body-
length: 15.5" (394mm)
width: 6.4" (163mm) at rear wheels (widest point)
6.3" (161mm) behind from wheels (thinnest point)
height: 4.4" (111mm)
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
(4) 5 x 11mm front & rear gearboxes
(4) 10 x 15mm front & rear diffs
(2) 5 x 11mm front hubs
(2) 10 x 15mm front hubs
(4) 5 x 11mm rear hubs