Savox SAVSC1267SG

$88.99
Savox logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
alternate part numbers:
High Torque Digital Servo .09/277 @ 7.4v
Savox SAVSC1267SG - High Torque Digital Servo .09/277 @ 7.4v
This high speed high voltage servo will give you all the performance you need without breaking the bank. For under $100 the SC-1267SG offers you the complete package. This steel geared servo is water resistant with 4 silicon seals implanted. So if you want to blow by the competition then this servo is for you!

Features:
Combines leading edge technology with super high 12 bit (4096) resolution. Higher performance due to Increased voltage and improved technologyIncredible torque Increased transit speed Increased efficiencyWater resistant with 4 silicon seals implantedStrong and precise-made steel gears Suitable for 1/8th nitro racing and large scale aircraftSuitable for 600 and 700 class helicopter 1/8th scale buggies, truggy, and crawlers.
Dimensions(mm): 40.3x20.2x37.2
Weight(g): 62.0
Speed(@4.8V sec/60): . 13
Torque(@4.8V oz-in): 130.0
Speed(@6.0V sec/60): . 11
Torque(@6.0V oz-in): 180.5
Speed(@7.4V sec/60): . 09
Torque(@7.4V oz-in): 277.7
Gear: Unique Steel
Bearing: 2BB
Case: Aluminum
25 Tooth Spline is compatible with Futaba servo horns
Frequency: 250-333hz
Pulse Width Frequency: 1520

Dimensions(mm): 40.3x20.2x37.2
Weight(g): 62.0
Speed(@4.8V sec/60): . 13
Torque(@4.8V oz-in): 130.0
Speed(@6.0V sec/60): . 11
Torque(@6.0V oz-in): 180.5
Speed(@7.4V sec/60): . 09
Torque(@7.4V oz-in): 277.7
Gear: Unique Steel
Bearing: 2BB
Case: Aluminum
Running current (at no load): 100 mA @ 4.8V
Running current (at no load): 120 mA @ 6.0V
Running current (at no load): 150 mA @ 7.4V
Stall current (at locked): 2500 mA @ 4.8V
Stall current (at locked): 3000 mA @ 6.0V
Stall current (at locked): 3500 mA @ 7.4V
Idle current (at stopped): 5 mA @ 4.8V
Idle current (at stopped): 5 mA @ 6.0V
Idle current (at stopped): 5 mA @ 7.4V
Limit angle: 200°±10°
Connector wire gauge: #22 AWG
Connector wire length: 200 ±5 mm
Horn gear spline: 25T
Control system: Pulse width modification
Amplifier type: Digital Controller
Operating Travel: 100° (when1000→2000 μsec)
Neutral position: 1500 μsec
Dead band width: 3 ~ 5 μsec
Rotating direction: Counterclockwise (when1000→2000 μsec)
Pulse width range: 800→2200 μsec
Maximum travel: Approx 130°(when900→2100 μsec)


WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov