HPI HPI10760

This is the 1/10 scale electric powered, radio controlled, almost ready to run HPI E10 on-road Mazda RX7 Touring Car. This is an assembled version that requires battery and radio equipment. Chassis: Bathtub type .78" (20mm) thick with quick change battery holder and adjustable motor and radio equipment positions to easily convert from street/touring to drift driving with no extra parts to buy, adjustable body mounts to accomodate a large variety of touring car bodies Drive: Four wheel shaft Motor HPI Saturn 27T 540 size, HPIC1144 Shocks: Composite bodied Gearboxes: Closed Differentials: Front and rear bevel-type Transmission: Single-speed Tires: T-Grip 2.48" (63mm) diameter, 1.02" (26mm) wide Wheels: Six spoke, chrome Gram Lights 57S-Pro 2.08" (53mm) diameter, 1.02" (26mm) wide Body: Pre-painted Mazda RX7 with rear wing and all decals applied Suspension: Full-time independent Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bell-crank type with servo saver HPI E10 on-road Mazda RX7 Touring Car with painted body, wheels, tires, 27T motor and manual _ Radio: 2-Channel with one servo Electronic Speed Control: EN-1 with reverse Radio Batteries: (8) AA size Battery: 7.2V Charger: Timed or peak for 6-cell battery Misc. Items: Building and track equipment VEHICLE- Length: 14.8" (375mm) Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm) Height: 5.25" (133.35mm) Weight: 2.8 lbs (1270g) without body Wheelbase: 10" (255mm) Drive Ratio: 7.48:1 Tread: Front- 6.5" (165mm) (side-to-side at wheel centers) Rear - 6.8" (173mm) Front Track: 7.5" (190mm) Rear Track: 7.75" (197mm) Spur Gear: 65T Tires- Front and rear: 2.48" x 1.02" (63x26mm) BODY- Length: 17.75" (450.85mm) Width: 7.75" (196.85mm) at rear wheels (widest point) 7.5" (190.5mm) behind from wheels (thinnest point) Height: 4.25" (107.95mm) For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. 2 12x18x14 Center drive shaft DTXC1597 1 Body pictured on the box is painted light metallic blue For the RTR version with battery and radio, order HPIC2702. jxs 10/18/07 ir/jxs &